|
ML336RAM Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High Reliability Chip Inductors | |||
|
0805 FERRITE CHIP INDUCTORS
High Reliability Chip Inductors ML336RAM
â Higher inductance values than ceramic 0805 inductors
â Heavy guage wire for low DCR
â Ferrite construction for high current handling
This robust version of Coilcraftâs standard 0805AF series
features high temperature materials that allow operation
in ambient temperatures up to 155°C.
Part number1
ML336RAM111JRZ
ML336RAM681JRZ
ML336RAM102JRZ
ML336RAM122JRZ
ML336RAM152JRZ
ML336RAM182JRZ
ML336RAM222JRZ
ML336RAM272JRZ
ML336RAM332JRZ
ML336RAM472JRZ
ML336RAM682JRZ
ML336RAM103JRZ
ML336RAM153JRZ
ML336RAM223JRZ
âInductance2
±5% (µH)
0.11 @ 7.9 MHz
0.68 @ 7.9 MHz
1.0 @ 7.9 MHz
1.2 @ 7.9 MHz
1.5 @ 7.9 MHz
1.8 @ 7.9 MHz
2.2 @ 7.9 MHz
2.7 @ 7.9 MHz
3.3 @ 7.9 MHz
4.7 @ 7.9 MHz
6.8 @ 7.9 MHz
10 @ 2.5 MHz
15 @ 2.5 MHz
22 @ 2.5 MHz
âQâmin3
Impedance typ
(Ohms)
14 @ 7.9 MHz â 370 @ 500MHz
15 @ 7.9 MHz â 430 @ 100 MHz
13 @ 7.9 MHz â 670 @ 100 MHz
15 @ 7.9 MHz â 860 @ 100 MHz
16 @ 7.9 MHz
1000 @ 100 MHz
16 @ 7.9 MHz
1360 @ 100 MHz
15 @ 7.9 MHz â 840 @ 50 MHz
15 @ 7.9 MHz
1050 @ 50MHz
15 @ 7.9 MHz
1670 @ 50 MHz
14 @ 7.9 MHz â 950 @ 25 MHz
14 @ 7.9 MHz â 450 @ 10MHz
14 @ 2.5 MHz â 740 @ 10 MHz
13 @ 2.5 MHz
1300 @ 10MHz
13 @ 2.5 MHz
1620 @ 10 MHz
âSRF min4 â DCR max5
(MHz)
(Ohms)
1000
0.05
340
0.30
280
0.39
300
0.64
225
0.74
240
0.98
90
0.98
80
1.16
65
1.20
40
1.50
28
1.90
18
2.20
15
4.25
15
6.70
Imax
(mA)
700
410
360
260
250
210
190
190
190
170
150
130
90
75
Color
code
Brown
Orange
Yellow
Brown
Green
Blue
Brown
Violet
Gray
Black
Brown
Red
Yellow
Green
1. When ordering, please specify testing code:
ML336RAM103JRZ
Testing:
Z = COTS
H = Screening per Coilcraft CPâSAâ10001
N = Screening per Coilcraft CPâSAâ10003
2. Inductance measured at 0.1 Vrms, using Coilcraft SMD-A fixture in
Agilent/HP 4286A impedance analyzer or equivalent with Coilcraft-
provided correlation pieces.
3. Q measured on Agilent/HP 4291A with Agilent/HP 16197A test fixture
or equivalents.
4. SRF measured using Agilent/HP 8753ES network analyzer or
equivalent with Coilcraft CCF1297 test fixture.
5. DCR measured on a Keithley 580 Micro-ohmmeter or equivalent with
a Coilcraft CCF858 test fixture.
6. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
B
overall
F
A
G
F
C
H
D
Pick and
place
material
I
J
I
E
terminal
Terminal wraparound:
approx 0.008/0,20 both ends
ReScuogmgemsetend ed
LLaannddPPaatttteerrnn
ABCD
max max max ref E F G H I J
0.090 0.068 0.060 0.020 0.050 0.016 0.040 0.070 0.040 0.030 inches
2,29 1,73 1,52 0,51 1,27 0,41 1,02 1,78 1,02 0,76 mm
Core materialâFerrite
Terminationsâ Matte tin over nickel silver-platinum-glass frit
Weightâ 16.7ââ 18.0 mg
Ambient temperatureâ â55°C to +125°C with Imax current, +125°C
to +155°C with derated current
Storage temperatureâ Component: â55°C to +155°C.
Packaging: â55°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packagingâ 2000/7â³reel;
Plastic tape:â 8 mm wide, 0.23 mm thick, 4 mm pocket spacing,
1.6 mm pocket depth
Note: Dimensions are before solder application. For maximum overall
dimensions including solder, add 0.0025 in / 0,064 mm to B and
0.006 in / 0,15 mm to A and C.
© Coilcraft, Inc. 2011
®
Specifications subject to change without notice.
Please check our website for latest information. Document ML781-1â Revised 09/01/11
1102 Silver Lake Road
Cary IL 60013
Phone 800-981-0363
Fax 847-639-1508
E-mail cps@coilcraft.com
Web www.coilcraft-cps.com
|
▷ |