|
MA5475_14 Datasheet, PDF (1/1 Pages) Coilcraft lnc. – Flyback Transformer | |||
|
Document 1076
Flyback Transformer ForMaximMAX17595
Flyback Controller
⢠Mounted on Maxim MAX17595 Evaluation Kit
⢠Bias winding output: 12 V, 20 mA
⢠Universal and telecom (36 V â 72 V) input
⢠3500 Vrms, one minute primary and bias to secondary isolation
Core materialâFerrite
Terminationsâ RoHS tin-silver-copper (96.5/3.0/0.5) over tin over
nickel over phos bronze. Other terminations available at additional cost.
Weightâ 21.8 g
Ambient temperatureâ â40°C to +125°C
Storage temperatureâ Component: â40°C to +125°C.
Tray packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 24 parts per tray
PCB washingâ Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Part
â number
MA5475-AL
Inductance
â at 0 Adc1
±10% (µH)
180
Inductance
â at Ipk2 â DCR max (Ohms)3
min (µH) priâââsecâââbias
162
0.210 0.016 0.185
Leakage
â Inductance4
â Turns ratio
max (µH)
â pri : secâ pri : bias
3.1
1 : 0.24 1 : 0.20
â Ipk2
(A) â Output5
2.0 15 V, 2 A
1. Inductance is for the primary (pins 1 â 2), measured at 100 kHz, 0.1 Vrms.
2. Peak primary current drawn at minimum input voltage.
3. DCR for the secondary is with the windings connected in parallel.
4. Leakage inductance is for the primary winding with the secondary winding shorted.
5. Output is for the secondary. Bias winding output is 12 V, 20 mA.
6. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
0.004 / 0,10 mm
Dot indicates pin 1
1.169
29,7
1.285
32,65
max
0.535
13,6
max
1
Pri
2
5
Bias
6
12
11
Sec
0.108
2,75
1
1.10
28,0
0.079
2,0
12
1.024
26,0
0.043
1,1
7
6
7
8
Recommended
Land Pattern
1.053
26,75
max
6
7 0.148
1
12 0.148
3,75
3,75
0.657
16,7
Dimensions are in
inches
mm
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 1076â Revised 03/10/14
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|