English
Language : 

MA5157_13 Datasheet, PDF (1/1 Pages) Coilcraft lnc. – Flyback Transformer
Document 974
Flyback Transformer forNXPSemiconductor
SSL2103 SMPS Controller
• Developed for NXP Semiconductor for use with the SSL2103
SMPS Controller for dimmable LED lighting
• Designed to operate at 100 kHz with 120 Vac input
• 2000 Vrms, one minute isolation from primary and auxiliary
to secondary; 500 Vrms, one minute isolation from primary
to auxiliary
Core material Ferrite
Terminations  RoHS compliant tin-silver over tin over copper over
steel. Other terminations available at additional cost.
Weight  11.8 g
Ambient temperature  –40°C to +85°C
Storage temperature  Component: –40°C to +85°C.
Tray packaging: –40°C to +80°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  100 per tray
PCB washing  Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
Part
number
MA5157-AL
  L at 0 A1
±10% (µH)
750
  L at Ipk2
min (µH)
635
DCR max (Ohms)3
 
  Leakage L4
pri   sec   aux max (µH)
0.880 0.095 0.585
20.5
Turns ratios   Ipk2
pri : sec  pri : aux (A)   Output5
1 : 0.23 1 : 0.20 1.2 23 V, 0.74 A
1. Inductance is for the primary, measured at 100 kHz, 0.1 Vrms, 0 Adc.
2. Ipk is peak primary current drawn at minimum input voltage.
3. DCR for the primary is measured with the windings connected in parallel.
4. Leakage inductance is for the primary winding, measured at 100 kHz,
0.1 Vrms, 0 A with secondary pins shorted.
6. Output is for the secondary. Output of the auxiliary coil is 19 V, 20 mA.
5. Electrical specifications at 25°C.
Dimensions are in
inches
mm
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 974  Revised 08/04/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.