LPZ_15 Datasheet, PDF (1/10 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 1244-1
Shielded Power Inductors  High Inductance
• High inductance values (220 – 4700 µH) not available in the
corresponding LPS series of parts
• Rugged construction improves pick and place operation
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant matte tin over nickel over silver.
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.

  _{Part number}1
LPZ3008-224MR_
LPZ3008-334MR_
LPZ3010-334MR_
LPZ3015-334MR_
LPZ3314-105MR_
LPZ3314-155MR_
LPZ4012-335MR_
LPZ4018-155MR_
LPZ4018-185MR_
LPZ4018-225MR_
LPZ4018-335MR_
LPZ4414-155MR_
LPZ4414-185MR_
LPZ4414-225MR_
LPZ4414-335MR_
LPZ5010-105MR_
LPZ5015-335MR_
LPZ5015-475MR_
  _Inductance2
±20% (µH)
220
330
330
330
1000
1500
3300
1500
1800
2200
3300
1500
1800
2200
3300
1000
3300
4700
  _{DCR max}3
(Ohms)
11.5
18.0
18.5
23.0
31.0
44.0
65.0
25.0
31.5
32.5
48.0
26.4
35.0
42.5
56.0
28.0
55.0
80.0
  _{SRF typ}4 Isat (A)⁵
Irms (A)⁶
(MHz)
10% drop 20% drop 30% drop 20°C rise  40°C rise
9.0
0.067
0.073
0.076
0.100
0.145
7.0
0.059
0.064
0.066
0.090
0.130
7.0
0.10
0.105
0.115
0.085
0.11
5.0
0.10
0.11
0.11
0.070
0.095
3.0
0.090
0.099
0.100
0.082
0.100
2.7
0.080
0.086
0.090
0.060
0.080
0.95
0.074
0.078
0.080
0.050
0.065
2.4
0.095
0.10
0.105
0.080
0.11
2.3
0.090
0.095
0.10
0.070
0.095
2.1
0.088
0.094
0.10
0.070
0.090
1.6
0.082
0.092
0.094
0.055
0.075
2.2
0.096
0.099
0.10
0.085
0.11
1.9
0.089
0.094
0.097
0.075
0.10
1.9
0.082
0.089
0.092
0.065
0.080
1.3
0.072
0.078
0.083
0.055
0.070
3.0
0.087
0.096
0.10
0.080
0.11
1.7
0.064
0.072
0.076
0.055
0.075
1.4
0.062
0.069
0.072
0.045
0.065
1. When ordering, please specify termination and packaging codes:
LPZ3008-334MRC
Termination: R= RoHS compliant matte tin over nickel over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5) or
P = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481 embossed plastic
tape).
B= Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D= 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop from its value
without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1244-1  Revised 01/05/15