LPS6235-105MLB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors - LPS6235

Document 587-1
Shielded Power Inductors – LPS6235
• Low DCR; high current; shielded construction
• Perfect for backlight applications
Designer’s Kit C345 contains 3 each of all values
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight  460 – 480 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  350/7″reel; 1500/13″ reel  Plastic tape:  16 mm wide,
0.3 mm thick, 8 mm pocket spacing, 3.68 mm pocket depth
Recommended pick and place nozzle  OD: 6.2 mm;  ID: ≤ 3.1 mm
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.

DCR SRF
  _{Isat (A)}5 _{    Irms (A)}6
^  Inductance^{2  } max^{3  } typ⁴ 10% 20% 30% 20°C 40°C
  _{Part number}1 _{±20% (µH) (Ohms) (MHz) drop drop drop rise rise}
LPS6235-682ML_
LPS6235-822ML_
LPS6235-103ML_
LPS6235-123ML_
LPS6235-153ML_
6.8
8.2
10.0
12.0
15.0
0.075 55 2.6 2.7 2.8 1.30 1.90
0.095 48 2.5 2.6 2.7 1.30 1.85
0.100 37 2.3 2.4 2.5 1.28 1.80
0.110 29 1.9 2.2 2.3 1.25 1.75
0.125 25 1.9 2.0 2.0 1.22 1.70
LPS6235-183ML_
LPS6235-223ML_
LPS6235-333ML_
LPS6235-473ML_
LPS6235-563ML_
18.0
22.0
33.0
47.0
56.0
0.140 24 1.7 1.8 1.9 1.20 1.65
0.145 24 1.6 1.7 1.7 1.10 1.60
0.180 16 1.3 1.4 1.5 1.00 1.30
0.245 13 1.1 1.2 1.2 0.80 1.15
0.280 12 1.0 1.0 1.1 0.75 1.07
LPS6235-683ML_
LPS6235-823ML_
LPS6235-104ML_
LPS6235-124ML_
LPS6235-154ML_
68.0
82.0
100.0
120.0
150.0
0.345 10.8 0.90 0.94 0.96 0.73 1.00
0.315 10.0 0.46 0.52 0.55 0.72 0.95
0.375 9.0 0.46 0.52 0.54 0.70 0.90
0.435 8.3 0.44 0.48 0.51 0.60 0.80
0.535 7.3 0.37 0.43 0.45 0.53 0.73
LPS6235-224ML_
LPS6235-334ML_
LPS6235-474ML_
LPS6235-564ML_
LPS6235-684ML_
220.0
330.0
470.0
560.0
680.0
0.820
1.20
1.60
2.00
2.20
5.6 0.31 0.36 0.37 0.45 0.64
4.4 0.26 0.29 0.30 0.40 0.50
3.6 0.22 0.25 0.26 0.32 0.43
3.1 0.20 0.22 0.23 0.29 0.38
2.8 0.17 0.19 0.21 0.28 0.37
LPS6235-824ML_ 820.0 2.70 2.5 0.16 0.18 0.19 0.26 0.33
LPS6235-105ML_ 1000.0 3.40 2.2 0.14 0.17 0.18 0.24 0.30
LPS6235-155ML_ 1500.0 4.60 1.9 0.12 0.13 0.14 0.19 0.26
LPS6235-185ML_ 1800.0 5.42 1.7 0.11 0.12 0.13 0.18 0.23
LPS6235-225ML_ 2200.0 6.70 1.5 0.090 0.11 0.11 0.16 0.22
LPS6235-335ML_
LPS6235-475ML_
LPS6235-565ML_
LPS6235-685ML_
LPS6235-825ML_
3300.0
4700.0
5600.0
6800.0
8200.0
9.50
14.5
16.4
21.4
24.5
1.1 0.080
0.94 0.070
0.86 0.060
0.80 0.057
0.70 0.052
0.090
0.077
0.070
0.065
0.060
0.10
0.084
0.080
0.069
0.067
0.14 0.180
0.11 0.150
0.10 0.130
0.090 0.120
0.085 0.115
LPS6235-106ML_ 10000.0 29.5
0.61 0.050 0.055 0.060 0.075 0.095
1. Please specify termination and packaging codes:
LPS6235-106MLC
Termination: L = RoHS compliant silver-palladium-
platinum-glass frit.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481
embossed plastic tape (350 parts
per full reel).
B = Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D = 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (1500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 587-1  Revised 12/01/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.