LPS5030-103MLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors - LPS5030

Document 581-1
Shielded Power Inductors – LPS5030
• Very low DCR; excellent current handling
• 4.9 × 4.9 mm footprint; less than 3 mm tall
Designer’s Kit C420 contains 3 each of all values
Core material Ferrite
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight  226 – 244 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  750/7″ reel; 2500/13″ reel  Plastic tape:  12 mm wide,
0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth
Recommended pick and place nozzle  OD: 5 mm;  ID: ≤ 2.5 mm
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.

DCR SRF
^  Inductance^{2  } max^{3  } typ⁴
  _{Part number}1 _{±20% (µH) (Ohms) (MHz)}
LPS5030-901ML_
LPS5030-122ML_
LPS5030-172ML_
LPS5030-222ML_
LPS5030-332ML_
0.90 0.040 250
1.2
0.043 210
1.7
0.051 190
2.2
0.057 168
3.3
0.066 125
LPS5030-472ML_
4.7
LPS5030-562ML_
5.6
LPS5030-682ML_
6.8
LPS5030-822ML_
8.2
LPS5030-103ML_ 10.0
0.083 84
0.089 70
0.099 56
0.125 45
0.127 30
LPS5030-123ML_ 12.0
LPS5030-153ML_ 15.0
LPS5030-183ML_ 18.0
LPS5030-223ML_ 22.0
LPS5030-333ML_ 33.0
0.155 24
0.160 32
0.170 27
0.190 24
0.260 19
LPS5030-473ML_
LPS5030-683ML_
LPS5030-823ML_
LPS5030-104ML_
LPS5030-124ML_
47.0
68.0
82.0
100
120
0.330 16
0.440 12
0.470 11
0.600 10
0.800 9
LPS5030-154ML_ 150
LPS5030-224ML_ 220
LPS5030-334ML_ 330
LPS5030-474ML_ 470
LPS5030-564ML_ 560
0.860 7.5
1.35
6.0
1.80
5.0
2.80
4.0
3.20
3.6
LPS5030-684ML_
LPS5030-105ML_
LPS5030-155ML_
LPS5030-185ML_
LPS5030-225ML_
680
1000
1500
1800
2200
3.80
3.0
5.10
2.5
7.60
2.0
10.0
1.8
11.0
1.6
LPS5030-335ML_ 3300
19.5
1.3
LPS5030-475ML_ 4700
26.0
1.1
  _{Isat (A)}5 _{    Irms (A)}6
10% 20% 30% 20°C 40°C
drop drop drop rise rise
3.8 4.0 4.1 2.10 2.80
3.5 3.6 3.7 2.00 2.65
3.0 3.2 3.3 1.90 2.50
2.9 3.1 3.2 1.60 2.15
2.3 2.5 2.6 1.40 1.80
1.9 2.0 2.0 1.30 1.75
1.8 1.8 1.9 1.25 1.65
1.6 1.7 1.7 1.20 1.60
1.6 1.7 1.7 1.10 1.55
1.4 1.4 1.4 1.00 1.50
1.3 1.4 1.4 0.95 1.40
0.80 0.90 0.90 0.92 1.40
0.80 0.82 0.87 0.90 1.30
0.70 0.75 0.78 0.88 1.25
0.60 0.63 0.64 0.85 1.20
0.50 0.53 0.55 0.75 1.00
0.40 0.43 0.44 0.65 0.900
0.38 0.40 0.40 0.60 0.830
0.27 0.31 0.32 0.55 0.750
0.26 0.29 0.30 0.45 0.660
0.22 0.25 0.263 0.42
0.21 0.235 0.245 0.36
0.155 0.155 0.200 0.32
0.117 0.134 0.146 0.28
0.110 0.130 0.140 0.23
0.570
0.500
0.420
0.370
0.320
0.100 0.120 0.126 0.20
0.100 0.110 0.110 0.18
0.068 0.080 0.089 0.15
0.069 0.081 0.086 0.13
0.063 0.074 0.080 0.10
0.290
0.250
0.210
0.170
0.150
0.056 0.063 0.067 0.090 0.125
0.049 0.056 0.059 0.080 0.110
1. Please specify termination and packaging codes:
LPS5030-105MLC
Termination: L = RoHS compliant silver-palladium-
platinum-glass frit.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-
lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape (750 parts
per full reel).
B= Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added
($25 charge), use code letter C
instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (2500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4192A impedance analyzer or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at which the inductance drops the specified
amount from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 581-1  Revised 01/23/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.