|
LPS5015 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors | |||
|
Document 585-1
Shielded Power Inductors â LPS5015
⢠Very low DCR; excellent current handling
⢠5.0 à 5.0 mm footprint; less than 1.5 mm tall
Designerâs Kit C350 contains 3 each of all values
Core materialâFerrite
Core and winding lossâSee www.coilcraft.com/coreloss
Environmentalâ RoHS compliant, halogen free
Terminationsâ RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weightâ 102 â 107 mgAmbient temperatureâ â40°C to +85°C with
(40°C rise) Irms current.
Maximum part temperatureâ +125°C (ambient + temp rise). Derating.
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 1000/7â³ reel; 3500/13â³ reelâ Plastic tape:â 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth
Recommended pick and place nozzleâ OD: 5 mm;â ID: ⤠2.5 mm
PCB washingâ Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR SRF
â Isat (A)5 ââââIrms (A)6
â Inductance2 â max3 â typ4 10% 20% 30% 20°C 40°C
â Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
LPS5015-102MR_
LPS5015-132MR_
LPS5015-182MR_
LPS5015-222MR_
LPS5015-332MR_
1.0 0.050 183 3.6 3.8 3.9 1.90 2.65
1.3 0.065 150 2.5 2.6 2.8 1.70 2.35
1.8 0.075 128 2.6 2.8 2.9 1.50 2.15
2.2 0.090 116 2.4 2.6 2.7 1.40 2.00
3.3 0.125 88 1.9 2.0 2.0 1.30 1.80
LPS5015-472MR_
4.7 0.150 73 1.6 1.7 1.8 1.20 1.62
LPS5015-562MR_
5.6 0.175 67 1.6 1.6 1.6 1.10 1.45
LPS5015-682MR_
6.8 0.225 57 1.3 1.4 1.5 0.90 1.25
LPS5015-822MR_
8.2 0.280 49 1.3 1.3 1.4 0.85 1.05
LPS5015-103MR_ 10
0.300 44 1.2 1.3 1.3 0.80 0.95
LPS5015-123MR_ 12
LPS5015-153MR_ 15
LPS5015-183MR_ 18
LPS5015-223MR_ 22
LPS5015-333MR_ 33
0.350
0.360
0.550
0.675
0.750
40 1.0 1.1 1.2 0.75 0.84
38 0.80 0.84 0.86 0.73 0.84
35 0.75 0.77 0.80 0.70 0.83
31 0.70 0.73 0.75 0.60 0.82
24 0.55 0.59 0.60 0.50 0.70
LPS5015-473MR_ 47
LPS5015-563MR_ 56
LPS5015-683MR_ 68
LPS5015-104MR_ 100
LPS5015-124MR_ 120
1.00 18 0.46 0.48 0.49 0.45 0.57
1.13 17 0.40 0.43 0.45 0.40 0.52
1.45 15 0.33 0.38 0.39 0.35 0.47
1.95 12 0.30 0.33 0.34 0.30 0.42
2.50 10 0.25 0.28 0.30 0.27 0.37
LPS5015-154MR_ 150
3.40
9.3 0.23 0.25 0.26 0.25 0.33
LPS5015-224MR_ 220
4.50
7.3 0.20 0.21 0.22 0.22 0.29
LPS5015-334MR_ 330
7.40
5.7 0.15 0.17 0.18 0.17 0.22
LPS5015-474MR_ 470
7.50
4.9 0.12 0.12 0.13 0.16 0.21
LPS5015-564MR_ 560
8.50
4.3 0.10 0.11 0.12 0.14 0.190
LPS5015-684MR_ 680
10.6
LPS5015-105MR_ 1000
15.0
LPS5015-155MR_ 1500
25.0
LPS5015-185MR_ 1800
28.0
LPS5015-225MR_ 2200
36.0
4.0 0.10 0.11 0.11 0.13 0.175
3.2 0.080 0.090 0.093 0.10 0.150
2.5 0.080 0.086 0.088 0.090 0.140
2.2 0.078 0.083 0.086 0.085 0.130
2.1 0.072 0.078 0.080 0.065 0.090
1. Please specify termination and packaging codes:
LPS5015-225MRC
Termination: R= RoHS compliant matte tin over nickel
over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging: C= 7â³ machine-ready reel. EIA-481
embossed plastic tape 1000 parts
per full reel).
B= Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D= 13â³ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (3500 parts per full
reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agi-
lent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified inductance
drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from
25°C ambient. This information is for reference only and
does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ
before soldering.
Document 585-1â Revised 09/02/15
|
▷ |