LPS5015-102MLB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors – LPS5015

Document 585-1
Shielded Power Inductors – LPS5015
• Very low DCR; excellent current handling
• 5.0 × 5.0 mm footprint; less than 1.5 mm tall
Designer’s Kit C350 contains 3 each of all values
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight  102 – 107 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  1000/7″ reel; 3500/13″ reel  Plastic tape:  12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth
Recommended pick and place nozzle  OD: 5 mm;  ID: ≤ 2.5 mm
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.

DCR SRF
  _{Isat (A)}5 _{    Irms (A)}6
^  Inductance^{2  } max^{3  } typ⁴ 10% 20% 30% 20°C 40°C
  _{Part number}1 _{±20% (µH) (Ohms) (MHz) drop drop drop rise rise}
LPS5015-102MR_
LPS5015-132MR_
LPS5015-182MR_
LPS5015-222MR_
LPS5015-332MR_
1.0 0.050 183 3.6 3.8 3.9 1.90 2.65
1.3 0.065 150 2.5 2.6 2.8 1.70 2.35
1.8 0.075 128 2.6 2.8 2.9 1.50 2.15
2.2 0.090 116 2.4 2.6 2.7 1.40 2.00
3.3 0.125 88 1.9 2.0 2.0 1.30 1.80
LPS5015-472MR_
4.7 0.150 73 1.6 1.7 1.8 1.20 1.62
LPS5015-562MR_
5.6 0.175 67 1.6 1.6 1.6 1.10 1.45
LPS5015-682MR_
6.8 0.225 57 1.3 1.4 1.5 0.90 1.25
LPS5015-822MR_
8.2 0.280 49 1.3 1.3 1.4 0.85 1.05
LPS5015-103MR_ 10
0.300 44 1.2 1.3 1.3 0.80 0.95
LPS5015-123MR_ 12
LPS5015-153MR_ 15
LPS5015-183MR_ 18
LPS5015-223MR_ 22
LPS5015-333MR_ 33
0.350
0.360
0.550
0.675
0.750
40 1.0 1.1 1.2 0.75 0.84
38 0.80 0.84 0.86 0.73 0.84
35 0.75 0.77 0.80 0.70 0.83
31 0.70 0.73 0.75 0.60 0.82
24 0.55 0.59 0.60 0.50 0.70
LPS5015-473MR_ 47
LPS5015-563MR_ 56
LPS5015-683MR_ 68
LPS5015-104MR_ 100
LPS5015-124MR_ 120
1.00 18 0.46 0.48 0.49 0.45 0.57
1.13 17 0.40 0.43 0.45 0.40 0.52
1.45 15 0.33 0.38 0.39 0.35 0.47
1.95 12 0.30 0.33 0.34 0.30 0.42
2.50 10 0.25 0.28 0.30 0.27 0.37
LPS5015-154MR_ 150
3.40
9.3 0.23 0.25 0.26 0.25 0.33
LPS5015-224MR_ 220
4.50
7.3 0.20 0.21 0.22 0.22 0.29
LPS5015-334MR_ 330
7.40
5.7 0.15 0.17 0.18 0.17 0.22
LPS5015-474MR_ 470
7.50
4.9 0.12 0.12 0.13 0.16 0.21
LPS5015-564MR_ 560
8.50
4.3 0.10 0.11 0.12 0.14 0.190
LPS5015-684MR_ 680
10.6
LPS5015-105MR_ 1000
15.0
LPS5015-155MR_ 1500
25.0
LPS5015-185MR_ 1800
28.0
LPS5015-225MR_ 2200
36.0
4.0 0.10 0.11 0.11 0.13 0.175
3.2 0.080 0.090 0.093 0.10 0.150
2.5 0.080 0.086 0.088 0.090 0.140
2.2 0.078 0.083 0.086 0.085 0.130
2.1 0.072 0.078 0.080 0.065 0.090
1. Please specify termination and packaging codes:
LPS5015-335MRC
Termination: R= RoHS compliant matte tin over nickel
over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape 1000 parts
per full reel).
B= Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (3500 parts per full
reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agi-
lent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 585-1  Revised 08/01/13
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.