LPS5015-102ML Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 585-1
Shielded Power Inductors–LPS5015 Series
• Very low DCR; excellent current handling
• 5.0 × 5.0 mm footprint; less than 1.5 mm tall
Designer’s Kit C350 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 102 – 107 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth
Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm
PCB washing Only pure water or alcohol recommended
DCR SRF
Inductance² max³ typ⁴
Part number¹ ±20% (µH) (Ohms) (MHz)
LPS5015-102ML_
LPS5015-132ML_
LPS5015-182ML_
LPS5015-222ML_
LPS5015-332ML_
1.0 0.050 183
1.3 0.065 150
1.8 0.075 128
2.2 0.090 116
3.3 0.125 88
LPS5015-472ML_
LPS5015-562ML_
LPS5015-682ML_
LPS5015-822ML_
LPS5015-103ML_
4.7 0.150 73
5.6 0.175 67
6.8 0.225 57
8.2 0.280 49
10
0.300 44
LPS5015-123ML_
12
LPS5015-153ML_
15
LPS5015-183ML_
18
LPS5015-223ML_
22
LPS5015-333ML_
33
0.350 40
0.360 38
0.550 35
0.675 31
0.750 24
LPS5015-473ML_
47
LPS5015-563ML_
56
LPS5015-683ML_
68
LPS5015-104ML_ 100
LPS5015-124ML_ 120
1.00
18
1.13
17
1.45
15
1.95
12
2.50
10
LPS5015-154ML_ 150
3.40
9.3
LPS5015-224ML_ 220
4.50
7.3
LPS5015-334ML_ 330
7.40
5.7
LPS5015-474ML_ 470
7.50
4.9
LPS5015-564ML_ 560
8.50
4.3
LPS5015-684ML_ 680
10.6
4.0
LPS5015-105ML_ 1000
15.0
3.2
LPS5015-155ML_ 1500
25.0
2.5
LPS5015-185ML_ 1800
28.0
2.2
LPS5015-225ML_ 2200
36.0
2.1
LPS5015-335ML_ 3300
55.0
1.7
LPS5015-475ML_ 4700
80.0
1.4
Isat (A)⁵
10% 20% 30%
drop drop drop
3.6 3.8 3.9
2.5 2.6 2.8
2.6 2.8 2.9
2.4 2.6 2.7
1.9 2.0 2.0
1.6 1.7 1.8
1.6 1.6 1.6
1.3 1.4 1.5
1.3 1.3 1.4
1.2 1.3 1.3
1.0 1.1 1.2
0.80 0.84 0.86
0.75 0.77 0.80
0.70 0.73 0.75
0.55 0.59 0.60
0.46 0.48 0.49
0.40 0.43 0.45
0.33 0.38 0.39
0.30 0.33 0.34
0.25 0.28 0.30
0.23 0.25 0.26
0.20 0.21 0.22
0.15 0.17 0.18
0.12 0.12 0.13
0.10 0.11 0.12
0.10
0.080
0.080
0.078
0.072
0.11
0.090
0.086
0.083
0.078
0.11
0.093
0.088
0.086
0.080
0.064 0.072 0.076
0.062 0.069 0.072
Irms (A)⁶
20°C 40°C
rise rise
1.90 2.65
1.70 2.35
1.50 2.15
1.40 2.00
1.30 1.80
1.20 1.62
1.10 1.45
0.90 1.25
0.85 1.05
0.80 0.95
0.75 0.84
0.73 0.84
0.70 0.83
0.60 0.82
0.50 0.70
0.45 0.57
0.40 0.52
0.35 0.47
0.30 0.42
0.27 0.37
0.25 0.33
0.22 0.29
0.17 0.22
0.16 0.21
0.14 0.190
0.13 0.175
0.10 0.150
0.090 0.140
0.085 0.130
0.065 0.090
0.055 0.075
0.045 0.065
1. Please specify termination and packaging codes:
LPS5015-335MLC
Termination: L = RoHS compliant silver-palladium-
platinum-glass frit.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape 1000 parts per
full reel).
B= Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (3500 parts per full
reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
Document 585-1 Revised 12/05/08
© Coilcraft, Inc. 2009