|
LPS4018-223MLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors LPS4018 | |||
|
Document 435-1
Shielded Power Inductors â LPS4018
⢠Very low DCR; excellent current handling
⢠4.0 à 4.0 mm footprint; less than 1.8 mm tall
Core materialâFerrite
Core and winding lossâ See www.coilcraft.com/coreloss
Terminationsâ RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weightâ 54 â 100 mg
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â40°C to +125°C.
Packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 1000/7â³ reel; 3500/13â³ reelâ Plastic tape:â 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth
Recommended pick and place nozzleâ OD: 4 mm;â ID: ⤠2 mm
PCB washingâ Only pure water or alcohol recommended
DCR SRF
â Isat (A)5 ââââIrms (A)6
â Inductance2 â max3 â typ4 10% 20% 30% 20°C 40°C
â Part number1
(µH) (Ohms) (MHz) drop drop drop rise rise
LPS4018-561ML_ âââ0.56 ±20% 0.033 250 4.8 5.2 5.3 1.9 2.8
LPS4018-102NL_ âââ1.0 ±30% 0.042 180 3.8 3.9 4.0 1.8 2.5
LPS4018-222ML_ âââ2.2 ±20% 0.070 90 2.7 2.8 2.9 1.5 2.0
LPS4018-332ML_ âââ3.3 ±20% 0.080 75 1.9 2.0 2.0 1.4 1.9
LPS4018-472ML_ âââ4.7 ±20% 0.125 65 1.8 1.9 1.9 1.3 1.8
LPS4018-682ML_ âââ6.8 ±20% 0.150 50
LPS4018-103ML_ â1â0 ±20% 0.200 40
LPS4018-153ML_ â1â5 ±20% 0.260 32
LPS4018-183ML_ â1â8 ±20% 0.270 27
LPS4018-223ML_ â2â2 ±20% 0.360 26
1.2 1.3 1.3 1.0 1.5
1.1 1.2 1.3 0.90 1.25
0.86 0.91 0.94 0.80 1.12
0.78 0.83 0.85 0.70 1.00
0.74 0.80 0.83 0.65 0.90
LPS4018-333ML_ â3â3 ±20%
LPS4018-473ML_ â4â7 ±20%
LPS4018-683ML_ â6â8 ±20%
LPS4018-104ML_ 1â00 ±20%
LPS4018-124ML_ 1â20 ±20%
0.420
0.650
0.950
1.40
1.60
20 0.58 0.64 0.68 0.55 0.80
16 0.51 0.55 0.56 0.45 0.68
13 0.41 0.45 0.46 0.40 0.56
10 0.34 0.36 0.37 0.35 0.50
9.0 0.31 0.33 0.34 0.30 0.45
LPS4018-154ML_ 1â50 ±20% 2.00
LPS4018-184ML_ 1â80 ±20% 2.50
LPS4018-224ML_ â220 ±20% 3.70
LPS4018-334ML_ 3â30 ±20% 5.90
LPS4018-474ML_ 4â70 ±20% 7.80
8.0 0.27
7.5 0.24
6.5 0.21
5.5 0.18
4.5 0.14
0.29 0.30 0.28 0.40
0.26 0.27 0.26 0.36
0.225 0.235 0.20 0.30
0.19 0.20 0.17 0.23
0.16 0.17 0.15 0.20
LPS4018-564ML_ 5â60 ±20% 10.0
LPS4018-684ML_ 6â80 ±20% 11.5
LPS4018-824ML_ 8â20 ±20% 14.0
LPS4018-105ML_ 1000 ±20% 18.0
LPS4018-155ML_ 1500 ±20% 25.0
4.0 0.13 0.14
3.5 0.12 0.13
2.9 0.11 0.12
2.8 0.10 0.11
2.4 0.095 0.10
0.15
0.14
0.13
0.11
0.105
0.14 0.18
0.12 0.16
0.10 0.14
0.098 0.125
0.080 0.110
LPS4018-185ML_ 1800 ±20% 31.5
LPS4018-225ML_ 2200 ±20% 32.5
LPS4018-335ML_ 3300 ±20% 48.0
2.3 0.090 0.095 0.100 0.070 0.095
2.1 0.088 0.094 0.100 0.070 0.090
1.6 0.082 0.092 0.094 0.055 0.075
1. Please specify termination and packaging codes:
LPS4018-223MLC
Termination: L = RoHS compliant silver-palladium-
platinum-glass frit.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-
lead (63/37).
Packaging: C= 7â³ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
B= Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added
($25 charge), use code letter C
instead.
D= 13â³ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same
for parts with SRF â¥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Compo-
nentsâ before soldering.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 435-1â Revised 05/15/12
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
|
▷ |