LPS3008-222MLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors – LPS3008

Document 438-1
Shielded Power Inductors – LPS3008
• Very low DCR; excellent current handling
• Only 0.8 mm tall; 3.0 × 3.0 mm footprint
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight  22 – 25 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  1000/7″ reel; 3500/13″ reel; Plastic tape:  12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth
Recommended pick and place nozzle  OD: 3 mm;  ID: ≤ 1.5 mm
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.

DCR SRF
^  Inductance^{2  } max^{3  } typ⁴
  _{Part number}1 _{±20% (µH) (Ohms) (MHz)}
LPS3008-561ML_
LPS3008-801ML_
LPS3008-102ML_
LPS3008-152ML_
LPS3008-222ML_
0.56
0.80
1.0
1.5
2.2
0.072 330
0.092 255
0.125 220
0.134 170
0.175 150
LPS3008-332ML_ 3.3
LPS3008-472ML_ 4.7
LPS3008-562ML_ 5.6
LPS3008-682ML_ 6.8
LPS3008-822ML_ 8.2
0.285 114
0.350 87
0.450 78
0.500 75
0.600 61
LPS3008-103ML_ 10
LPS3008-123ML_ 12
LPS3008-183ML_ 18
LPS3008-223ML_ 22
LPS3008-333ML_ 33
0.650 56
0.790 49
1.25 38
1.50 35
2.30 23
LPS3008-473ML_ 47
LPS3008-683ML_ 68
LPS3008-104ML_ 100
LPS3008-124ML_ 120
LPS3008-154ML_ 150
3.00 21
4.75 18
6.85 14
7.00 13
8.00 11
LPS3008-184ML_ 180
LPS3008-224ML_ 220
LPS3008-334ML_ 330
9.00 10
11.5
9
18.0
7
  _{Isat (A)}5 _{    Irms (A)}6
10% 20% 30% 20°C 40°C
drop drop drop rise rise
1.8 2.0 2.1 1.4 2.0
1.6 1.7 1.8 1.1 1.6
1.3 1.4 1.5 0.90 1.3
1.1 1.3 1.3 0.87 1.2
1.0 1.1 1.1 0.85 1.1
0.81 0.86 0.88 0.74 0.95
0.68 0.73 0.74 0.68 0.80
0.62 0.67 0.70 0.58 0.73
0.58 0.61 0.63 0.50 0.67
0.52 0.56 0.58 0.45 0.60
0.46 0.51 0.52 0.42 0.56
0.45 0.48 0.50 0.38 0.50
0.35 0.38 0.40 0.33 0.44
0.29 0.33 0.34 0.29 0.38
0.27 0.30 0.31 0.25 0.32
0.22
0.18
0.15
0.084
0.080
0.23
0.19
0.16
0.094
0.088
0.24
0.20
0.16
0.10
0.092
0.21 0.27
0.175 0.23
0.160 0.21
0.140 0.190
0.130 0.175
0.070 0.078 0.082 0.120 0.160
0.067 0.073 0.076 0.100 0.145
0.059 0.064 0.066 0.090 0.130
1. Please specify termination and packaging codes:
LPS3008-104MLC
Termination: L = RoHS compliant silver-palladium-
platinum-glass frit.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
B= Less than full reel. In tape, but not
machine ready. To have a leader
and trailer added ($25 charge), use
code letter C instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same
for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES or
equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Compo-
nents” before soldering.
• Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to
33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of
220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents and
to order, contact Coilcraft or visit http://order.coilcraft.com.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 438-1  Revised 09/30/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.