|
LPO4815-472MLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors - LPO4815 | |||
|
Document 354 -1
SMT Power Inductors â LPO4815
â DCR3 â SRF4
â Inductance2 max typ â Isat5 â Irms6
â Part number1
(µH) (Ohms) (MHz) (A) (A)
LPO4815-102ML_ ââ1.0 ±20%
LPO4815-152ML_ ââ1.5 ±20%
LPO4815-222ML_ ââ2.2 ±20%
LPO4815-332ML_ ââ3.3 ±20%
LPO4815-392ML_ ââ3.9 ±20%
0.036
0.085
0.088
0.12
0.13
230 1.6 1.9
200 1.5 1.7
150 1.1 1.5
115 0.90 1.3
105 0.86 1.2
LPO4815-472ML_ ââ4.7 ±20% 0.15
LPO4815-682ML_ ââ6.8 ±20% 0.18
LPO4815-822ML_ ââ8.2 ±20% 0.22
LPO4815-103KL_ â 10 ±10% 0.23
LPO4815-123KL_ â 12 ±10% 0.31
95 0.77 1.1
72 0.65 1.0
65 0.58 0.90
60 0.50 0.85
50 0.45 0.80
LPO4815-153KL_ â 15 ±10% 0.36
LPO4815-223KL_ â 22 ±10% 0.46
LPO4815-333KL_ â 33 ±10% 0.71
LPO4815-393KL_ â 39 ±10% 0.83
LPO4815-473KL_ â 47 ±10% 1.20
45 0.42 0.75
35 0.37 0.70
30 0.28 0.65
25 0.26 0.60
25 0.22 0.55
LPO4815-683KL_ â 68 ±10% 1.40
LPO4815-104KL_ 100 ±10% 2.15
LPO4815-154KL_ 150 ±10% 3.15
LPO4815-224KL_ 220â±10% 4.30
20 0.20 0.45
15 0.15 0.36
12 0.13 0.30
10 0.11 0.27
⢠Very low profile - only 1.5 mm high!
⢠Handles current up to 1.9 Amps rms
Designerâs Kit C376 contains 3 each of all values
Core materialâFerrite
Core and winding lossâ See www.coilcraft.com/coreloss
Terminationsâ RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weightâ 70.0 â 78.5 mg
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 1000/7â³ reel; 3500/13â³ reelâ Plastic tape:â 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.6 mm pocket depth
Recommended pick and place nozzleâ OD: 4.6 mm; ID: ⤠2.3 mm
PCB washingâ Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
1. When ordering, please specify termination and packaging codes:
LPO4815-224KLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7â³ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13â³ machine-ready reel. EIA-481 embossed plastic
tape (3500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4191A or equivalent.
5. DC current at which the inductance drops 10% (typ) from its value with-
out current.
6. Current that causes a 40°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 354-1â Revised 10/14/08
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|
▷ |