LPO3010-102NL Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors

Document 399-1
SMT Power Inductors - LPO3010 Series
• Miniature power inductors – 3 × 3 mm, only 1.0 mm tall
• Low DCR; excellent current handling
Designer’s Kit C388 contains 3 of each part
Core material Ferrite
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 20 – 22 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.14 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤1.5 mm
PCB washing Only pure water or alcohol recommended
Part number¹
LPO3010-102NL_
LPO3010-122NL_
LPO3010-152NL_
LPO3010-222NL_
LPO3010-332NL_
LPO3010-472NL_
LPO3010-682NL_
LPO3010-822NL_
LPO3010-103ML_
LPO3010-153ML_
LPO3010-223ML_
LPO3010-333ML_
LPO3010-473ML_
DCR³
Inductance² max
(µH) (Ohms)
1.0 ±30%
1.2 ±30%
1.5 ±30%
2.2 ±30%
3.3 ±30%
0.140
0.160
0.200
0.265
0.335
4.7 ±30%
6.8 ±30%
8.2 ±30%
10 ±20%
15 ±20%
0.570
0.650
1.00
1.15
1.57
22±20% 2.20
33 ±20% 2.80
47±20% 4.60
SRF⁴
typ
(MHz)
200
190
150
140
100
80
68
60
50
35
30
14
12
Isat⁵
(A)
1.7
1.6
1.3
1.2
0.96
0.76
0.68
0.64
0.50
0.42
0.37
0.31
0.30
Irms⁶
(A)
1.4
1.4
1.0
0.90
0.60
0.50
0.47
0.45
0.45
0.40
0.35
0.29
0.28
1. When ordering, please specify termination and packaging codes:
LPO3010-473MLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (3500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES or equivalent.
5. DC current at which the inductance drops 10% (typ) from its value
without current.
6. Current that causes a 40°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 399-1 Revised 02/25/09