IFLY0012L Datasheet, PDF (1/1 Pages) Coilcraft lnc. – DC-DC Flyback Transformer for Telecom

Document 269
IntersFiol ^{rISuLs6e4w01ithfamily}
DC-DC Flyback Transformer for Telecom
This low profile flyback transformer is designed for
applications such as Subscriber Line Interface Circuits
(SLICs), cable and DSL modems and set top boxes.
For free evaluation samples, contact Coilcraft or visit
www.coilcraft.com.
Part number¹
IFLY0012L_
Inductance
at 0 Adc²
±10% (µH)
6.0
Inductance
at 6.5 Adc²
min (µH)
4.8
DCR max
(Ohms)
0.021 (pins 8 - 1)
0.690 (pins 7 - 2)
0.690 (pins 6 - 3)
0.690 (pins 5 - 4)
Leakage
inductance
max (µH)
0.3
Input
9 V – 20 V
Output
Isolation
(Vrms)
–24 V, 170 mA 500
–72 V, 170 mA
1. When ordering, please specify packaging code:
IFLY0012LD
Packaging: D = 13″ machine ready reel. EIA-481 embossed plastic tape (225 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead.
2. Inductance is for the primary, measured at tested 100 kHz, 1.0 Vrms.
3. Operating temperature range –40°C to +85°C.
4. Electrical specifications at 25°C.
Dot on Pin 1
1
8
B
IFLY0012
4
5
C
0.004/0,01
A
F
D
4
5
1
E
8
Primary
1
7
Gnd
2
–24 V
6
3
5
4 _{–72 V}
1
8
Recommended
Land Pattern
A max
0.925
23,5
B max
0.675
17,15
C max
0.360
9,14
D nom E nom F nom
0.591 0.148 0.079 × 0.110 inches
15,01 3,76 2,01 × 2,79 mm
Weight: 5.2 g
Terminations: Matte tin over nickel over phos bronze
Tape and reel: 225/13″ reel 44 mm tape width
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2008
Document 269 Revised 01/26/05