|
HA3858_16 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Magnetics for 300 W Power Supply with PFC | |||
|
Document 746-1
Magnetics for 300 W Power Supply with PFC
⢠Specified by Texas Instruments in Reference Design SLUU341
for 300 Watt Isolated PFC Power Supply
⢠HA3950-AL, Flyback transformer (T201) for 5 W bias supply
operates with an input voltage range of 100 â 450 V.
⢠HA3858-AL, Gate drive transformer (T301)
Core materialâFerrite
Terminationsâ RoHS compliant tin-silver over tin over copper. Other
terminations available at additional cost.
Weightâ HA3950-AL: 13.5 g; HA3858-AL: 4.1 g
Ambient temperatureâ â40°C to +85°C
Storage temperatureâ Component: â40°C to +85°C.
Tray packaging: â40°C to +80°C
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 100 per tray
PCB washingâ Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
HA3950-AL Flyback Transformer
Part
number
Inductance
â at 0 A1
±10% (mH)
Inductance
Leakage
â at Ipk2
DCR max
inductance
(mH)
(Ohms) â max (µH)3
Turns ratio
Pri:Sec:P1
HA3950-AL
2.3
1.61
0.860 (pri)
0.109 (sec)
0.080 (P1)
1. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/
HP 4263B impedance analyzer or equivalent.
2. Peak primary current drawn at minimum input voltage.
3. Leakage inductance is for the primary and is measured with the second-
ary shorted.
4. Output of the P1 winding is 10 V, 20 mA.
5. Isolation:â 3000 Vrms, one minute primary to secondary;
500 Vrms, one minute windings to core
6. Electrical specifications at 25°C.
16.5
1 : 0.16 : 0.11
Dot indicates pin 1
0.680 max
17,30
0.110
2,79
min
0.590
15,0
1
8
Pri
Sec
2
5
3
P1
4
0.830
21,1
4
5
0.830
21,1
max
1
8
Dimensions are in
inches
mm
â Ipk2
(A)
0.3
â Output4
15 V, 0.33 A
0.197
5,0
1
0.197
5,0
0.025
0,64
0.590
15,0
8
0.10,428Ã
4
5
Recommended
PC Board Layout
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 746-1â Revised 07/23/09
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|
▷ |