GA3550-BL Datasheet, PDF (1/1 Pages) Coilcraft lnc. – Gate Drive Transformer

Document 765
Gate Drive Transformer ForusewithTIUCD30xx
Digital Power Controllers
• Selected by Texas Instruments for their PR796 and
PR841 evaluation boards.
• Isolation: 3000 Vrms primaries to secondary;
500 Vrms windings to core
Core material Ferrite
Terminations RoHS compliant tin-silver over tin over copper.
Other terminations available at additional cost.
Weight 6.3 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Packaging: –40°C to +80°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 200/13″ reel Plastic tape: 44 mm wide, 0.4 mm thick,
24 mm pocket spacing, 10.56 mm pocket depth
PCB washing Only pure water or alcohol recommended
Part
number¹
GA3550-BL_
Turns
ratio
1:1:1
Primary
inductance²
±25% (µH)
460
Leakage
inductance³
max (µH)
1.15 (Pri [A])
1.25 (Pri [B])
1. When ordering, please specify a packaging code:
GA3550-BLD
Packaging: D = 13″ machine ready reel. EIA-481 embossed plastic
tape (200 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To
have a leader and trailer added ($25 charge), use
code letter D instead.
DCR max
(Ohms)
Volt-time
product⁴
(V-µsec)
SRF
typ⁵
(MHz)
Capacitance
max (pF)
0.410 (Pri [A])
165
0.475 (Pri [B])
0.440 (sec)
5.85
34.0 (1 – 10)
10.5 (1 – 5)
2. Inductance is for each winding, measured at 200 kHz, 0.4 Vrms, 0 Adc.
3. Leakage inductance is measured at 200 kHz, 0.4 Vrms with secondary
pins shorted.
4. Volt-time product is per winding.
5. SRF is per winding, measured on an Agilent/HP 4192 or equivalent.
6. Operating temperature range −40°C to +85°C.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Dot indicates pin 1
1
10
1
0.028
0,70
0.100
2,54
12
0.685
17,40
max
0.069
1,75
0.100
2,54
1
12
Recommended
Land Pattern
Pri [ A]
Sec
2
9
5
7
6
0.699
17,00
0.748
19,0
0.130
3,30
Pri [ B]
6
0.394
10,0
max
0.799
20.30
0.950
24,13
max
0.004 / 0,10
Dimensions are in
inches
mm
Specifications subject to change without notice.
Please check our website for latest information.
Document 765 Revised 10/20/09
© Coilcraft, Inc. 2009