GA3199-AL Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Power Inductor

Document 685-1
Power Inductor – GA3199-AL ForONSemiconductor
NCP1654 PFC Controller
• Designed for ON Semiconductor for their 300 Watt, wide
mains, PFC stage, driven by the NCP1654 PFC Controller
• Shown as L1 on Application Note AND8324/D
• High inductance: 650 µH; high saturating current: 6.3 A
Core material Ferrite
Terminations RoHS compliant tin-silver over tin over nickel over
phos bronxe. Other terminations available at additional cost.
Weight 94 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +85°C.
Packaging: –40°C to +80°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 20 per tray
PCB washing Only pure water or alcohol recommended
Part
number
GA3199-AL
Inductance¹
±10% (µH)
650
DCR max
(Ohm)
0.165
SRF typ²
(kHz)
770
10% drop
5.8
Isat (A)³
20% drop
6.1
30% drop
6.3
1. Inductance measured at 10 kHz, 0.1 Vrms, 0 Adc.
2. SRF measured on an Agilent/ HP 4192A impedance analyzer or equivalent
3. DC current at which the inductance drops the specified amount from its value without current.
4. Current that causes the specified temperature rise from 25°C ambient.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms (A)⁴
20°C rise 40°C rise
2.9
3.8
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 685-1 Revised 01/15/09