|
GA3136_16 Datasheet, PDF (1/1 Pages) Coilcraft lnc. – Flyback Transformer | |||
|
Document 628
Flyback Transformer For Texas Instruments
UCC1809/2809/3809
Primary Side Controller
⢠Flyback transformer for 50Watt dc-to-dc fixed frequency current
mode switching power supplies
⢠Designed to operate with 22 â 26 V input at 150 kHz
⢠1500 Vrms, one minute isolation from primary to secondary
Core materialâFerrite
Terminationsâ RoHS tin-silver over tin over nickel over phos bronze.
Other terminations available at additional cost.
Weightâ 27.1 g
Ambient temperatureâ â40°C to +125°C
Storage temperatureâ Component: â40°C to +125°C.
Tray packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 24 per tray
PCB washingâ Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Inductance Inductance
Leakage
Part
Power â atâ0âA1
â at Ipk2 â DCR max (Ohms)3 â inductance4 Turns ratios5 â Ipk2
number
(W) ±10%â(µH) min (µH) pri sec bias max (µH) priâ:âsec priâ:âbias (A) â Output6
GA3136-BL 53
35.0
31.5 0.029 0.074 0.208 0.230
1â:â1.40 1â:â0.33 5.9 â 53âV, 1.0âA
1. Inductance is measured at 150 kHz, 0.1 Vrms.
2. Peak primary current drawn at minimum input voltage.
3. DCR for the primary is with the windings connected in parallel.
4. Leakage inductance is for the primary windings connected in parallel
and with the secondary winding shorted.
5. Turns ratios are with the primary windings connected in parallel.
6. Output is for the secondary winding. Output of the bias winding output is
12 V, 20 mA.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
0.004 / 0,10 mm
6
5
7
Pri
Sec
3
8
4
2
Bias
1
Primary windings to be connected
in parallel on PC board.
0.108
2,75
1
0.079
1.10
2,0
28,0
12
Recommended
Land Pattern
6
7 0.157
4,0
6
1.053
26,75
max
1
Dot indicates pin 1
0.551
14,0
max
1.169
29,7
1.285
32,65
max
1.024
26,0
0.043
1,1
7
0.657
16,7
12 0.157
4,0
Dimensions are in
inches
mm
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 628â Revised 12/14/11
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|