GA3092_15 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High-Current Air Core Inductors

Document 625-1
High-Current Air Core Inductors
The use of heavy gauge wire allows these parts to have
the lowest DCR and highest current ratings of our air-
core inductors.They offer Q values of 100 or greater from
150 MHz to 1 GHz.
Request free evaluation samples by contacting Coilcraft
or visiting www.coilcraft.com.
SRF
Part  ^  Inductance^{2  } Q^{2  } typ³
  _number1 _{±5% (nH) typ (GHz)}
GA3092-AL_ 3.7
GA3093-AL_ 6.6
GA3094-AL_ 12.0
GA3095-AL_ 17.5
100 17.5
100 4.0
140 2.4
140 2.2
DCR
  _max4   _Irms5 _Wt
(mOhm) (A) (mg)
2.0 7.0 150
2.0 7.0 220
2.0 7.0 280
2.0 7.0 390
1. When ordering, please specify packaging code:
GA3095-ALC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (250 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel). Factory order only,
not stocked.
2. L and Q measured at 150 MHz, 0.1 Vrms, 0 A using an Agilent/HP
4291A impedance analyzer with an Agilent/HP 16193A test fixture.
3. SRF measured using an Agilent/HP 8722ES network analyzer and a
Coilcraft SMD-D test fixture.
4. DCR measured using a micro-ohmmeter.
5. Current that causes a 15°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute
maximum ratings.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Terminations  RoHS compliant tin-silver (96.5/3.5) over copper
Ambient temperature  –40°C to +125°C with Irms current
Maximum part temperature  +140°C (ambient + temp rise)
Storage temperature  Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF)  1 billion hours
Packaging  250/7″reel; 1000/13″ reel  Plastic tape:  16 mm wide,
0.35 mm thick, 12 mm pocket spacing, 4.9 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Document 625-1  Revised 10/13/15