GA3092-AL Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Air Core Inductors

Document 625-1
Air Core Inductors
These parts have the lowest DCR and highest current
ratings of our air-core inductors.
Request free evaluation samples by contacting Coilcraft
or visiting www.coilcraft.com.
SRF DCR
Part
Inductance² Q² typ³
max⁴ Irms⁵ Wt
number¹ ±5% (nH) typ (GHz) (mOhm) (A) (mg)
GA3092-AL_ 3.7
GA3093-AL_ 6.6
GA3094-AL_ 12.0
GA3095-AL_ 17.5
120 17.5
107 5.8
105 2.4
115 2.2
2.0 7.0 150
2.0 7.0 220
2.0 7.0 280
2.0 7.0 390
1. When ordering, please pecify packaging code:
GA3095-ALC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (250 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel). Factory order only, not
stocked.
2. L and Q measured at 150 MHz, 0.1 Vrms, 0 A using an Agilent/HP
4291A impedance analyzer with an Agilent/HP 16193A test fixture.
3. SRF measured using an Agilent/HP 8722ES network analyzer and a
Coilcraft SMD-D test fixture.
4. DCR measured using a micro-ohmmeter.
5. Current that causes a 15°C temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Terminations RoHS compliant tin-silver over copper
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 1 billion hours
Packaging 250/7″reel; 1000/13″ reel Plastic tape: 16 mm wide,
0.35 mm thick, 12 mm pocket spacing, 4.9 mm pocket depth
PCB washing Only pure water or alcohol recommended
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 625-1 Revised 03/06/09