|
EPL3010_15 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors | |||
|
Document 615-1
Shielded Power Inductors â EPL3010
⢠Low profile shielded power inductors, 3 à 3 à 1 mm
⢠Extremely low DCR,high SRF ratings, Isat ratings up to 2.2 A
Designerâs Kit C431 contains 5 each of all values
Core materialâFerrite
Core and winding lossâSee www.coilcraft.com/coreloss
Environmentalâ RoHS compliant, halogen free
Terminationsâ RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over
nickel over silver-platinum. Other terminations available at additional cost.
Weightâ 32 â 38 mg
Ambient temperatureâ â40°C to +85°C with (40°C rise) Irms current.
Maximum part temperatureâ +125°C (ambient + temp rise). Derating.
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 2000/7â³ reel; 7500/13â³ reel;â Plastic tape:â 8 mm wide,
0.20 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth
PCB washingâ Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
â Part number1
EPL3010-301ML_
EPL3010-102ML_
EPL3010-152ML_
EPL3010-222ML_
EPL3010-472ML_
EPL3010-103ML_
EPL3010-223ML_
â Inductance2
±20% (µH)
0.30
1.0
1.5
2.2
4.7
10
22
â DCR nom3
(Ohms)
0.040
0.071
0.086
0.137
0.278
0.573
1.25
â DCR max3
(Ohms)
0.045
0.078
0.095
0.150
0.306
0.631
1.38
â SRF typ4 â Isat (A)5
(MHz)
10% drop 20% drop 30% drop
249
1.0
1.6
2.2
151
0.80
1.3
1.8
116
0.68
1.1
1.6
98
0.54
0.92
1.3
60
0.36
0.61
0.80
38
0.20
0.34
0.48
27
0.18
0.30
0.42
â Irms (A)6
20°C riseâ 40°C rise
1.7
2.2
1.2
1.7
1.2
1.6
0.98
1.3
0.74
0.99
0.52
0.70
0.35
0.47
1. When ordering, please specify packaging code:
EPL3010-103MLC
Packaging: C = 7â³ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13â³ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Document 615-1â Revised 09/08/15
|
▷ |