|
DO5022P-104MLD Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors - DO5022P | |||
|
Document 172-1
SMT Power Inductors â DO5022P
⢠Excellent current handling â up to 28.8 Asat.
⢠Low dc resistance keeps power losses to a minimum
Designerâs Kit C311 contains 3 of each 20% tolerance part
Core materialâFerrite
Core and winding lossâ See www.coilcraft.com/coreloss
Terminationsâ RoHS compliant gold over nickel over phos bronze.
Other terminations available at additional cost.
Weightâ 2.8ââ 3.9 g
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 250 per 13â³ reelâ Plastic tape:â 32 mm wide,
0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth
PCB washingâ Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
DCR
L2 Percent max
â Part number1 (µH) â tol3 (Ohms)
DO5022P-102ML_
DO5022P-222ML_
DO5022P-332ML_
DO5022P-562ML_
DO5022P-822ML_
DO5022P-103ML_
DO5022P-153ML_
DO5022P-223ML_
DO5022P-333ML_
DO5022P-473ML_
DO5022P-683_L_
DO5022P-104_L_
DO5022P-154_L_
DO5022P-224_L_
DO5022P-334_L_
DO5022P-474_L_
DO5022P-684_L_
DO5022P-105_L_
1.0
2.2
3.3
5.6
8.2
10
15
22
33
47
68
100
150
220
330
470
680
1000
20
20
20
20
20
20
20
20
20
20
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
0.009
0.014
0.018
0.020
0.029
0.031
0.036
0.047
0.066
0.086
0.13
0.19
0.25
0.38
0.56
0.85
1.1
1.8
SRF âââIâsat (A)5
â typ4 10% 20% â Irms6
(MHz) drop drop (A)
80 27.6 28.8 8.6
80 18.5 19.8 7.1
60 14.5 15.5 6.2
40 12.5 13.8 5.3
30 10.3 11.5 4.8
30
9.4 10.5 4.3
22
7.5 8.2 4.0
20
6.5 7.2 3.5
15
5.2 6.1 3.0
9
4.2 4.7 2.6
8
3.7 4.1 2.3
7
3.0 3.4 1.8
6
2.5 2.8 1.5
5
2.0 2.3 1.2
4
1.7 1.9 1.0
3
1.5 1.7 0.82
2.5 1.2 1.3 0.72
2.0 0.95 1.1 0.56
1. Specify tolerance, termination and packaging codes:
DO5022P-105MLD
Tolerance: M = 20%, K = 10% (Table shows stock
tolerances in bold.)
Termination: L = RoHS compliant gold over nickel over
phos bronze.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: D = 13â³ machine-ready reel. EIA-481
embossed plastic tape (250 parts per
full reel).
B = Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added
($25 charge), use code letter D
instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4263B LCR meter or equivalent.
3. Tolerances in bold are stocked for immediate shipment.
4. SRF >13 MHz measured using Agilent/HP 8753D
network analyzer; <13 MHz using Agilent/HP 4192A.
5. DC current at which inductance drops the specified
amount from its value without current.
6. Current that causes a 40°C temperature rise from 25°C
ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ
before soldering.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 172-1â Revised 12/09/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|
▷ |