DO5010H_15 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors - DO5010H Series

Document 284-1
SMT Power Inductors - DO5010H Series
• Irms ratings up to 15 A; saturation currents up to 30 A
• Heavy gauge wire for low DC resistance
Designer’s Kit C355 contains 3 of each part
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Terminations  RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Weight  3.2 – 4.0 g
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  250 per 13″ reel  Plastic tape:  32 mm wide,
0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR
^  Inductance²â€‰ max
  _{Part Number}1_{  ±20% (µH) (mOhm)}
DO5010H-781ML_
0.78
2.6
DO5010H-152ML_
1.5
4.0
DO5010H-222ML_
2.2
6.1
DO5010H-332ML_
3.3
8.6
DO5010H-392ML_
3.9
10
DO5010H-472ML_
4.7
14
DO5010H-602ML_
6.0
17
DO5010H-782ML_
7.8
18
DO5010H-103ML_
10
26
DO5010H-123ML_
12
28
DO5010H-153ML_
15
32
DO5010H-223ML_
22
47
DO5010H-333ML_
33
66
DO5010H-473ML_
47
86
DO5010H-683ML_
68
130
DO5010H-104ML_ 100
190
DO5010H-154ML_ 150
250
DO5010H-224ML_ 220
380
DO5010H-334ML_ 330
560
DO5010H-474ML_ 470
850
DO5010H-684ML_ 680
DO5010H-105ML_ 1000
1100
1800
SRF
 typ³
(MHz)
156
100
75
60
55
40
35
35
28
26
20
20
15
9
8
7
6
5
4
3
2.5
2.0
 Isat⁴
(A)
30
25
20
17
15
13
12
11
10
8.5
8.0
7.0
5.5
4.5
3.5
3.0
2.6
2.4
1.9
1.4
1.2
1.0
 Irms⁵
(A)
15
15
12
10
9.0
8.4
7.5
7.5
6.0
5.2
4.4
3.5
3.0
2.6
2.3
1.8
1.5
1.2
1.0
0.82
0.72
0.56
1. When ordering, please specify termination and packaging codes:
DO5010H-105MLD
Termination: L = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape.
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284A
LCR meter or equivalent.
3. SRF measured using Agilent/HP 8753D network analyzer.
4. DC current at which the inductance drops 10% (typ) from its value
without current.
5. Current that causes a 40°C temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 284-1  Revised 02/25/15