|
DO5010H-105MLD Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors - DO5010H Series | |||
|
Document 284-1
SMT Power Inductors - DO5010H Series
DCR
ââInductance2â max
â Part Number1â ±20% (µH) (mOhm)
DO5010H-781ML_
0.78
2.6
DO5010H-152ML_
1.5
4.0
DO5010H-222ML_
2.2
6.1
DO5010H-332ML_
3.3
8.6
DO5010H-392ML_
3.9
10
DO5010H-472ML_
4.7
14
DO5010H-602ML_
6.0
17
DO5010H-782ML_
7.8
18
DO5010H-103ML_
10
26
DO5010H-123ML_
12
28
DO5010H-153ML_
15
32
DO5010H-223ML_
22
47
DO5010H-333ML_
33
66
DO5010H-473ML_
47
86
DO5010H-683ML_
68
130
DO5010H-104ML_ 100
190
DO5010H-154ML_ 150
250
DO5010H-224ML_ 220
380
DO5010H-334ML_ 330
560
DO5010H-474ML_ 470
850
DO5010H-684ML_ 680
DO5010H-105ML_ 1000
1100
1800
SRF
âtyp3
(MHz)
156
100
75
60
55
40
35
35
28
26
20
20
15
9
8
7
6
5
4
3
2.5
2.0
âIsat4
(A)
30
25
20
17
15
13
12
11
10
8.5
8.0
7.0
5.5
4.5
3.5
3.0
2.6
2.4
1.9
1.4
1.2
1.0
âIrms5
(A)
15
15
12
10
9.0
8.4
7.5
7.5
6.0
5.2
4.4
3.5
3.0
2.6
2.3
1.8
1.5
1.2
1.0
0.82
0.72
0.56
⢠Irms ratings up to 15 A; saturation currents up to 30 A
⢠Heavy gauge wire for low DC resistance
Designerâs Kit C355 contains 3 of each part
Core materialâFerrite
Core and winding lossâ See www.coilcraft.com/coreloss
Terminationsâ RoHS compliant tin-silver over copper. Other termina-
tions available at additional cost.
Weightâ 3.2 â 4.0 g
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 250 per 13â³ reelâ Plastic tape:â 32 mm wide,
0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth
PCB washingâ Only pure water or alcohol recommended
1. When ordering, please specify termination and packaging codes:
DO5010H-105MLD
Termination: L =
RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: D = 13â³ machine-ready reel. EIA-481 embossed plastic
tape.
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284A
LCR meter or equivalent.
3. SRF measured using Agilent/HP 8753D network analyzer.
4. DC current at which the inductance drops 10% (typ) from its value
without current.
5. Current that causes a 40°C temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Document 284-1â Revised 10/14/08
|
▷ |