|
DO3340P-104 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors - DO3340P | |||
|
Document 171-1
SMT Power Inductors â DO3340P
L
Part â±20%2
â number1
(µH)
DO3340P-103ML_
DO3340P-153ML_
DO3340P-223ML_
DO3340P-333ML_
DO3340P-473ML_
DO3340P-683ML_
DO3340P-104ML_
DO3340P-154ML_
DO3340P-224ML_
DO3340P-334ML_
DO3340P-474ML_
DO3340P-684ML_
DO3340P-105ML_
10
15
22
33
47
68
100
150
220
330
470
680
1000
DCR
max
(Ohms)
0.040
0.050
0.066
0.080
0.110
0.17
0.22
0.34
0.44
0.70
0.95
1.15
2.0
SRF
typ â Isat3 âIrms4
(MHz) (A) (A)
35
8.0 3.5
18
7.0 3.0
13
5.5 2.5
11
4.0 2.0
9.0 3.8 1.6
7.0 3.0 1.2
5.5 2.5 1.2
4.5 2.0 0.9
3.5 1.6 0.7
3.0 1.2 0.6
2.5 1.0 0.3
2.0 1.0 0.2
1.5 0.8 0.1
⢠Excellent current handling â up to 3.5 Arms with an 8 A saturation
current rating for a 10 µH part.
Designerâs Kit C310 contains 3 of each part
Core materialâFerrite
Core and winding lossâ See www.coilcraft.com/coreloss
Terminationsâ RoHS compliant gold over nickel over phos bronze.
Other terminations available at additional cost.
Weightâ 1.8ââ 2.8 g
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+105°C with derated current
Storage temperatureâ Component: â40°C to +105°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 225 per 13â³ reelâ Plastic tape:â 24 mm wide,
0.4 mm thick, 24 mm pocket spacing, 11.4 mm pocket depth
PCB washingâ Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
1. When ordering, please specify termination and packaging codes:
DO3340P-105MLD
Termination: L = RoHS compliant gold over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: D = 13â³ machine-ready reel. EIA-481 embossed plastic
tape (225 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP
4263B LCR meter or equivalent.
3. DC current at which inductance drops 10% (typ) from its value without
current.
4. Current that causes a 20°C temperature rise from 25°C ambient
5. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 171-1â Revised 01/12/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|
▷ |