DO3316P-102 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors – DO3316P Series

Document 179-1
SMT Power Inductors – DO3316P Series
• High energy storage and very low resistance
• High inductance values are perfect for EL driver applications.
Designer’s Kit C378 contains 3 of each 20% part
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Terminations  RoHS compliant gold over nickel over phos bronze.
Other terminations available at additional cost.
Weight  0.92 – 1.23 g
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  1000 per 13″ reel  Plastic tape:  24 mm wide,
0.33 mm thick, 12 mm pocket spacing, 5.8 mm pocket depth
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
DCR SRF
Part
L² Percent max ^  typ^{4  } Isat^{5  } Irms⁶
  _number1 _{(µH) tol}3 _{(Ohms) (MHz) (A) (A)}
DO3316P-102ML_ 1.0 20
0.009 100
DO3316P-152ML_ 1.5 20
0.010 90
DO3316P-222_L_ 2.2 20,10 0.012 80
DO3316P-332_L_ 3.3 20,10 0.015 65
DO3316P-472_L_ 4.7 20,10 0.018 45
DO3316P-682_L_ 6.8 20,10 0.027 38
DO3316P-103_L_ 10 20,10 0.038 30
DO3316P-153_L_ 15 20,10 0.046 27
DO3316P-223_L_ 22 20,10 0.085 19
DO3316P-333_L_ 33 20,10 0.10 15
DO3316P-473_L_ 47 20,10 0.14 12
DO3316P-683_L_ 68 20,10 0.20 10
DO3316P-104_L_ 100 20,10 0.28
9
DO3316P-154_L_ 150 20,10 0.40
6
DO3316P-224_L_ 220 20,10 0.61
5
9.0 6.8
8.0 6.4
7.0 6.1
6.4 5.4
5.4 4.8
4.6 4.4
3.8 3.9
3.0 3.1
2.3 2.7
2.0 2.1
1.6 1.8
1.4 1.5
1.2 1.3
1.0 1.0
0.80 0.80
DO3316P-334_L_ 330
DO3316P-474_L_ 470
DO3316P-684_L_ 680
DO3316P-105_L_ 1000
DO3316P-155_L_ 1500
DO3316P-335_L_ 3300
20,10 1.02
20,10 1.27
20,10 2.02
20,10 3.00
20,10 4.49
20,10 8.97
4.5 0.60 0.60
3.5 0.50 0.50
2.5 0.40 0.40
2.0 0.30 0.30
1.7 0.29 0.27
1.1 0.19 0.17
1. When ordering, specify tolerance, termination and packaging codes:
DO3316P-105MLD
Tolerance: M = 20%, K = 10% (Table shows stock tolerances in bold.)
Termination: L = RoHS compliant gold over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
2. Tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR
meter or equivalent.
3. Tolerances in bold are stocked for immediate shipment.
4. SRF >13 MHz measured using Agilent/HP 8753D network analyzer;
<13 MHz using Agilent/HP 4192A.
5. DC current at which inductance drops 10% (typ) from its value without
current.
6. Current that causes a 40°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 179-1  Revised 09/25/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.