|
DO3308P_15 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors – DO3308P | |||
|
Document 170-1
SMT Power Inductors â DO3308P
⢠Handle saturating currents up to 4.2 Amps
⢠Defense Supply Center CID: A-A-59738
Designerâs Kit C309 contains 3 each of all values
Core materialâFerrite
Core and winding lossâ See www.coilcraft.com/coreloss
Terminationsâ RoHS compliant electroplated gold (<50 µin) over nickel
over phos bronze. Other terminations available at additional cost.
Weightâ 594ââ 640 mg
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 1000/13â³ reelâ Plastic tape:â 24 mm wide, 0.4 mm thick,
12 mm pocket spacing, 3.7 mm pocket depth
PCB washingâ Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR
â L ±20%2 Percent max
âPart number1
(µH)
â tol3 (Ohms)
DO3308P-472_L_
DO3308P-682_L_
DO3308P-103_L_
DO3308P-153_L_
DO3308P-223_L_
4.7 20,10
6.8 20,10
10
20,10
15
20,10
22
20,10
0.036
0.060
0.085
0.12
0.18
DO3308P-333_L_ 33
DO3308P-473_L_ 47
DO3308P-683_L_ 68
DO3308P-104_L_ 100
DO3308P-154_L_ 150
20,10 0.25
20,10 0.32
20,10 0.54
20,10 0.69
20,10 0.94
DO3308P-224_L_
DO3308P-334_L_
DO3308P-474_L_
DO3308P-684_L_
DO3308P-105_L_
220
330
470
680
1000
20,10 1.60
20,10 2.15
20,10 3.30
20,10 4.40
20,10 7.00
SRF
typ â Isat4 â Irms5
(MHz) (A) (A)
50
4.2 3.2
47
3.9 2.6
37
2.7 2.3
35
2.3 1.9
26
1.8 1.5
19
1.6 1.2
14
1.3 1.0
12
1.1 0.9
11
0.87 0.73
9.0 0.74 0.62
6.0 0.56 0.51
5.5 0.50 0.40
4.5 0.40 0.33
3.5 0.33 0.28
2.5 0.29 0.23
1. Please specify tolerance, termination and packaging codes:
DO3308P-105MLD
Tolerance: M= 20%â K = 10%
Termination: L = RoHS compliant gold over nickel over
phos bronze.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: D = 13â³ machine-ready reel. EIA-481 em-
bossed plastic tape (1000 parts per full
reel).
B = Less than full reel. In tape, but not ma-
chine ready.
To have a leader and trailer added ($25
charge), use code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. Tolerances in bold are stocked for immediate shipment
4. DC current at which inductance drops 10% (typ) from its
value without current.
5. Current that causes a 40°C temperature rise from 25°C
ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before
soldering.
Document 170-1â Revised 05/03/13
|
▷ |