DO3308P-223MLB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors – DO3308P

Document 170-1
SMT Power Inductors – DO3308P
• Handle saturating currents up to 4.2 Amps
• Defense Supply Center CID: A-A-59738
Designer’s Kit C309 contains 3 each of all values
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Terminations  RoHS gold over nickel over phos bronze. Other
terminations available at additional cost.
Weight  594 – 640 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  1000/13″ reel  Plastic tape:  24 mm wide, 0.4 mm thick,
12 mm pocket spacing, 3.7 mm pocket depth
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
DCR
^  L ±20%² Percent max
 _{Part number}1
(µH)
  _tol3 _(Ohms)
DO3308P-472_L_
DO3308P-682_L_
DO3308P-103_L_
DO3308P-153_L_
DO3308P-223_L_
4.7 20,10
6.8 20,10
10
20,10
15
20,10
22
20,10
0.036
0.060
0.085
0.12
0.18
DO3308P-333_L_ 33
DO3308P-473_L_ 47
DO3308P-683_L_ 68
DO3308P-104_L_ 100
DO3308P-154_L_ 150
20,10 0.25
20,10 0.32
20,10 0.54
20,10 0.69
20,10 0.94
DO3308P-224_L_
DO3308P-334_L_
DO3308P-474_L_
DO3308P-684_L_
DO3308P-105_L_
220
330
470
680
1000
20,10 1.60
20,10 2.15
20,10 3.30
20,10 4.40
20,10 7.00
SRF
typ ^  Isat^{4  } Irms⁵
(MHz) (A) (A)
50
4.2 3.2
47
3.9 2.6
37
2.7 2.3
35
2.3 1.9
26
1.8 1.5
19
1.6 1.2
14
1.3 1.0
12
1.1 0.9
11
0.87 0.73
9.0 0.74 0.62
6.0 0.56 0.51
5.5 0.50 0.40
4.5 0.40 0.33
3.5 0.33 0.28
2.5 0.29 0.23
1. Please specify tolerance, termination and packaging codes:
DO3308P-105MLD
Tolerance: M= 20%  K = 10%
Termination: L = RoHS compliant gold over nickel over
phos bronze.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 em-
bossed plastic tape (1000 parts per full
reel).
B = Less than full reel. In tape, but not ma-
chine ready.
To have a leader and trailer added ($25
charge), use code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. Tolerances in bold are stocked for immediate shipment
4. DC current at which inductance drops 10% (typ) from its
value without current.
5. Current that causes a 40°C temperature rise from 25°C
ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before
soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 170-1  Revised 05/03/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.