|
DO1608C-472MLB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors – DO1608C | |||
|
Document 177-1
SMT Power Inductors â DO1608C
⢠High energy storage and very low resistance
⢠Defense Supply Center CID A-A-59742
Designerâs Kit C377 contains 3 of each stocked part
Core materialâFerrite
Core and winding lossâ See www.coilcraft.com/coreloss
Terminationsâ RoHS compliant gold over nickel over moly-manganese.
Other terminations available at additional cost.
Weightâ 128ââ 164 mg
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â40°C to +125°C.
Packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 750/7â³reel; 2500/13â³ reelâ Plastic tape:â 12 mm wide,
0.28 mm thick, 4 mm pocket spacing, 3 mm pocket depth
PCB washingâ Only pure water or alcohol recommended
DCR SRF ââ ââââIrms (A)5
Part âL2
% max typ â Isat4 20°C 40°C
â number1
(µH) âtol3 (Ohms) (MHz) (A) rise rise
DO1608C-102ML_
DO1608C-152ML_
DO1608C-222ML_
DO1608C-272ML_
DO1608C-332ML_
1.0 20
1.5 20
2.2 20
2.7 20
3.3 20
0.05 130 2.9 1.90 2.70
0.06 115 2.6 1.90 2.65
0.07 100 2.3 1.85 2.55
0.08 75 2.1 1.80 2.45
0.08 70 2.0 1.60 2.20
DO1608C-472ML_
DO1608C-682ML_
DO1608C-822ML_
DO1608C-103ML_
DO1608C-153ML_
4.7 20
6.8 20
8.2 20
10 20
15 20
0.09 50 1.5 1.40 1.90
0.13 45 1.2 1.20 1.60
0.16 40 1.15 1.10 1.55
0.16 35 1.10 1.10 1.50
0.23 30 0.90 0.90 1.25
DO1608C-223_L_ 22
DO1608C-333_L_ 33
DO1608C-473_L_ 47
DO1608C-683_L_ 68
DO1608C-104_L_ 100
DO1608C-154_L_ 150
DO1608C-224_L_ 220
DO1608C-334_L_ 330
DO1608C-474_L_ 470
DO1608C-684_L_ 680
20,10 0.37 20 0.70 0.75 0.95
20,10 0.51 15 0.58 0.60 0.80
20,10 0.64 14 0.50 0.52 0.70
20,10 0.86 11 0.40 0.44 0.60
20,10 1.27 9.0 0.31 0.37 0.50
20,10 2.00 6.0 0.27 0.28 0.39
20,10 3.11 5.5 0.22 0.23 0.31
20,10 3.80 5.0 0.18 0.22 0.30
20,10 5.06 4.0 0.16 0.20 0.26
20,10 9.20 3.0 0.14 0.14 0.19
DO1608C-105_L_ 1000 20,10 13.8
2.0 0.10 0.11 0.15
1. Please specify tolerance, termination and packaging codes:
DO1608C-105MLC
Tolerance: K = 10%, M = 20% (Table shows stock
tolerances in bold.)
Termination: L = RoHS compliant gold over nickel over
moly-manganese.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead
(63/37).
Packaging: C = 7â³ machine-ready reel. EIA-481 em-
bossed plastic tape (750 parts per full
reel).
B = Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added ($25
charge), use code letter C instead.
D = 13â³ machine-ready reel. EIA-481 em-
bossed plastic tape (2500 parts per full
reel).
2. Tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP
4263B LCR meter or equivalent.
3. Tolerances in bold are stocked for immediate shipment
4. DC current at which the inductance drops 10% (typ) from
its value without current.
5. Current that causes the specified temperature rise from 25°C
ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before
soldering.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 177-1â Revised 08/16/12
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
|
▷ |