DO1606T_15 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors - DO1606T

Document 213-1
SMT Power Inductors - DO1606T

Part
  _{L ±20%}2
  _number1
(µH)
DO1606T-102ML_
1.0
DO1606T-152ML_
1.5
DO1606T-222ML_
2.2
DO1606T-332ML_
3.3
DO1606T-472ML_
4.7
DO1606T-682ML_
6.8
DO1606T-822ML_
8.2
DO1606T-103ML_
10
DO1606T-153ML_
15
DO1606T-223ML_
22
DO1606T-333ML_
33
DO1606T-473ML_
47
DO1606T-683ML_
68
DO1606T-104ML_
100
DO1606T-154ML_
150
DO1606T-224ML_
DO1606T-334ML_
DO1606T-474ML_
DO1606T-684ML_
DO1606T-105ML_
220
330
470
680
1000
DCR SRF
max ref ^  Isat^{3  } Irms⁴
(Ohms) (MHz) (A) (A)
0.04 230 2.5 2.3
0.06 180 2.2 2.1
0.07 140 1.8 1.7
0.12 110 1.4 1.3
0.15 100 1.2 1.1
0.20 80 1.1 1.0
0.23 70 1.0 0.95
0.30 60 1.0 0.90
0.40 45 0.8 0.70
0.54 35 0.6 0.50
0.74 30 0.5 0.45
1.1
22 0.45 0.40
1.6
20 0.35 0.35
2.3
15 0.30 0.30
3.5
10 0.25 0.25
5.7
9 0.20 0.18
8.2
8 0.16 0.16
10.8
7 0.14 0.12
17.2
5 0.12 0.10
22.6
4 0.08 0.08
• Only 2.0 mm high
• Handles current up to 2.3 Amps rms
Designer’s Kit C338 contains 3 each of all values
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight  116 – 136 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  750/7″ reel; 2500/13″ reel  Plastic tape:  12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 2.5 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
1. When ordering, please specify termination and packaging codes:
DO1606T-105MLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481 embossed plastic
tape (750 parts per full reel).
B= Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D= 13″ machine-ready reel. EIA-481 embossed plastic
tape (2500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Vdc.
3. DC current at which the inductance drops 10% (typ) from its value
without current.
4. Current that causes a 40°C temperature rise from 25°C ambient.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 213-1  Revised 02/23/15