|
CST7030 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Current Sense Transformers | |||
|
Document 1101-1
Current Sense TransformersâCST7030
⢠AEC-Q200 Grade 1 qualified (â40°C to +125°C ambient)
⢠Small surface mount current sensors
⢠Sensed current up to 20 A; Frequency range up to 1 MHz
⢠Very low primary DC resistance
⢠500 Vrms, one minute isolation (hipot) between windings
⢠Designed for:
Continuous AC current monitoring in switched-mode power
supply; Overload and short-circuit protection; Current
measurement in traction motor and battery management
systems in conventional and xEV (EV, HEV, FCEV) vehicles.
⢠Can also be used in 48 V vehicle electrical systems
Turn s (N) â Induc tance2 D(CORhmmsa)x
Part number1
priâ:âsec
min (mH)
priâââsec
CST7030-020L_
CST7030-050L_
CST7030-070L_
CST7030-100L_
CST7030-150L_
1â:â20
1â:â50
1â:â70
1â:â100
1â:â150
0.053
0.333
0.652
1.330
2.993
0.0015
0.0015
0.0015
0.0015
0.0015
0.420
2.76
5.04
10.68
22.30
Frequency
range
(kHz)
78âââ1000
31âââ1000
22âââ1000
16âââ1000
10âââ1000
Volt-time
product3
(Vµsec)
6.4
16.0
22.4
32.0
48.0
Sensed Terminating
â current Iin4 ââresistance RT5
max (A)
(Ohms)
20
1.0
20
2.5
20
3.5
20
5.0
20
7.5
1. When ordering, please specify packaging code:
CST7030-150LC
Packaging: C = 7â³ machine-ready reel. EIA-481 embossed plastic
tape (600 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13â³ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (2500 parts per
full reel).
2. Inductance measured between secondary pins at 100 kHz, 0.1 Vrms,
0 Adc.
3. Maximum volt-time product is for the secondary, based on 2000 Gauss.
4. Primary current of 20 A causes less than 25°C temperature rise from
25°C ambient. Higher current causes a greater temperature rise (see
Temperature Rise vs Current curve).
5. Terminating resistance (RT) value is based on 1 Volt output with 20 Amps
flowing through the primary. Varying terminating resistance increases or
decreases output Voltage/Ampere according to the following equation:
RT = Vout à Nsecâ/âIin.
6 Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Typical Circuit
4
2
Iin
Pri
(1 turn)
Sec
(N turns)
RT
Vout
3
1
Core materialâFerrite
Terminationsâ RoHS compliant tin-silver over tin over nickel over phos
bronze
Weightâ 0.16 g
Ambient temperatureâ â40°C to +125°C
Maximum part temperatureâ +165°C (ambient + temp rise)
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 600/7â³ reel;â 2500/13â³ reelâ Plastic tape:â 16 mm wide,
0.35 mm thick, 8 mm pocket spacing, 3.0 mm pocket depth
PCB washingâ Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
US +1-847S-p6e3c9if-i6c4a0ti0onssasluebsj@ecctotiolccrahfat.ncgoemwithout notice.
UK +44-1P23le6a-s7e30c5h9e5ck soaulrews@ebcsoiitlecrfaofrt-leauterospt ein.fcoormmation.
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 1101-1â Revised 06/24/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|
▷ |