CP-N0531 Datasheet, PDF (1/1 Pages) Coilcraft lnc. – Outgassing Compliant Gate Drive Transformers

GATE DRIVETRANSFORMERS
Outgassing Compliant Gate Drive Transformers
• Designed for high switching speed, transformer coupled
MOSFET and IGBT gate drive circuits.
• Operating frequency: 50 kHz – 2 MHz
• Primary to secondary isolation: 1500 Vdc. For 1011 and
2011, isolation between secondaries is 500 Vdc.
Core material Ferrite
Terminations  Tin-lead over tin over nickel over phos bronze.
Weight  535 – 580 mg
Ambient temperature  –55°C to +125°C
Storage temperature  Component: –55°C to +125°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging  250/7″ reel  Plastic tape:  16 mm wide, 0.36 mm thick,
20 mm pocket spacing, 5.54 mm pocket depth
PCB washing  Only pure water or alcohol recommended


Part number
CP-N0531-1010SZ
CP-N0531-1510SZ
CP-N0531-1011SZ
CP-N0531-2011SZ
Turns
ratio
pri : sec
1:1
1.5 : 1
1:1:1
2:1:1
Primary
  _inductance1
min (µH)
296.0
680.0
264.0
330.0
Leakage
  _inductance2
max (µH)
1.5
4.0
0.30
0.60
Primary
DCR max
(Ohms)
Secondary
DCR max
(Ohms)
0.795
1.65
1.50
1.40
0.655
0.860
1.50 (2-5; 3-4)
0.650 (2-5); 0.790 (3-4)
Volt-time
product
(V-µsec)
25.8
40.8
24.5
24.5
SRF Capacitance
  _min3 _{pri to sec}
(MHz) max (pF)
1.75
14.0
1.00
14.0
2.50
95.0
2.00
18.0
1. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc
2. Leakage inductance measured at 100 kHz, 0.1 Vrms with secondary
pins shorted.
3. SRF is for the primary, measured with the secondary shorted using an
Agilent/HP 4192 or equivalent.
4. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
1010, 1510
4
1
Pri
Sec
6
3
1011, 2011
2
1
Pri
5
3
Sec
6
4
Dot over pin 1
05.2,4103max
08.3,2203max
0.197
5,00
0.022
0,55
0.024
0,60
3
4
2
5 ^0.073
1,85
1
6
Dimensions are in
inches
mm
0.004 /0,10
06.2,6600max
0.063
1,60
0.228
5,80
1
6
0.035
0,90
0.073
1,85
2
5
3
4
Recommended
Land Pattern
© Coilcraft, Inc. 2012
Document CP512  Revised 10/09/12
®
1102 Silver Lake Road
Cary, IL 60013
Phone [phone]
Fax [phone]
Email [e-mail]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.