CMT1-5.0-1L_13 Datasheet, PDF (1/5 Pages) Coilcraft lnc. – Common Mode Line Chokes

Document 326-1
Common Mode Line Chokes – CMT
Coilcraft’s CMT toroid style common mode chokes are
designed to provide the highest common mode impedance
over the widest frequency range.These parts are ideal for
any application requiring a high DC current bias and are
well suited for use in switch-mode power supplies.
Common mode chokes are most effective in filtering sup-
ply and return conductors with in-phase signals of equal
amplitude. Differential mode inductors are available for
filtering out-of-phase or uneven amplitude signals.
CMTs feature inductance values up to 125 mH and Irms
ratings as high as 15 Amps.
• 1250 Vrms, one minute isolation between windings
• Industry standard footprint.
• Creepage and clearance = 3.2 mm
• UL1446 Class B (130°C) Insulation System
(UL File E83628)
0.118
3,00
H max
CMTX-X.X-XL
XXXX
CC-3 Y
1
2
0.120/0.180
3,05/4,57
L max
Part
number
Internal
codes
Parts manufactured
prior to
September 2011
may be
marked differently.
2
3
W max
Schematic
1
4
Recommended
PC Board Layout
1
4
X
2
3
Weights:
CMT1: 13.3 – 25.5 g;
CMT2: 20.7– 41.7 g;
CMT3: 42.5 – 77.2 g;
CMT4: 115 – 117 g
Terminations: Tin-silver over copper
2
3
Y
CMT-1 Series
Leakage Lead
Part  L min¹ Irms  inductance²  DCR max³
H
L
W
X
Y
diameter
number
(mH) (A) max (µH) (Ohms)
max
max
max ±0.01/0,25 ±0.01/0,25 nom
PC board
hole
diameter
CMT1-5.0-1L
5.0 1.0
80
CMT1-8.0-1L
8.0 1.0
125
CMT1-15.0-1L 15.0 1.0
233
0.207
0.270
0.430
1.100/27,9 1.210/30,7 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
1.100/27,9 1.210/30,7 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
1.155/29,4 1.300/33,0 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
CMT1-2.5-2L
2.5 2.0
42
0.090 1.100/27,9 1.210/30,7 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
CMT1-4.0-2L
4.0 2.0
70
0.095 1.050/26,7 1.210/30,7 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
CMT1-7.5-2L
7.5 2.0
74
0.108 1.155/29,4 1.300/33,0 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
CMT1-1.3-4L
1.3 4.0
20
0.029 1.100/27,9 1.210/30,7 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
CMT1-2.1-4L
2.1 4.0
36
0.040 1.100/27,9 1.210/30,7 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
CMT1-3.7-4L
3.7 4.0
40
0.036 1.125/28.6 1.300/33,0 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
CMT1-1.0-6L
1.0 6.0
19
0.022 1.100/27,9 1.210/30,7 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
CMT1-1.7-6L
1.7 6.0
34
0.032 1.155/29,4 1.300/33,0 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
CMT1-3.0-6L
3.0 6.0
35
0.027 1.200/30,5 1.210/30,7 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
CMT1-.6-9L
0.6 9.0
11
0.012 1.200/30,5 1.210/30,7 0.625/15,9 0.80/20,3 0.40/10,2 0.042/1,07 0.071/1,80
CMT1-1.1-9L
1.1 9.0
12
0.013 1.300/33.0 1.210/30,7 0.625/15,9 0.80/20,3 0.40/10,2 0.042/1,07 0.071/1,80
CMT1-1.9-9L
1.9 9.0
20
0.017 1.300/33.0 1.400/35,6 0.625/15,9 0.80/20,3 0.40/10,2 0.042/1,07 0.071/1,80
CMT1-.5-12L
0.5 12.0
9
0.008 1.200/30,5 1.210/30,7 0.650/16,5 0.80/20,3 0.40/10,2 0.048/1,22 0.081/2,06
CMT1-.8-12L
0.8 12.0
9
0.008 1.200/30,5 1.210/30,7 0.650/16,5 0.80/20,3 0.40/10,2 0.048/1,22 0.081/2,06
CMT1-1.4-12L 1.4 12.0
16
0.011 1.300/33.0 1.210/30,7 0.650/16,5 0.80/20,3 0.40/10,2 0.048/1,22 0.081/2,06
CMT1-.3-15L
CMT1-.6-15L
CMT1-1.1-15L
0.3 15.0
0.6 15.0
1.1 15.0
6
0.005 1.300/33.0 1.210/30,7 0.625/15,9 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
6.5
0.006 1.250/31.8 1.210/30,7 0.650/16,5 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
13.7
0.008 1.250/31.8 1.210/30,7 0.700/17,8 0.80/20,3 0.40/10,2 0.054/1,37 0.091/2,32
1. Inductance is per winding, tested at 15.75 kHz, 0 Adc.
2. Leakage inductance is measured from pin 1 to pin 4 with pins 2 and 3 shorted.
3. DCR is per winding.
4. Operating temperature range –40°C to +85°C.
5. Electrical specifications at 25°C.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 326-1  Revised 05/21/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.