CCDLF-10000L Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Data Line EMI Filters

Document 511-1
SMT Data Line EMI Filters – CCDLF
Part number¹ Lines
CCDLF 10000L_ 10
CCDLF 8000L_ 8
CCDLF 8500L_ 8
Current
max
(mA)²
100
100
500
L
DCR
min max Color
(µH)³ (mOhms) Dot
5
250 Brown
5
250 Black
5
200 Green
1. When ordering, please specify termination and packaging codes:
CCDLF 8500LD
Termination L = RoHS compliant tin-silver-copper over silver-platinum
Special order: S = non-RoHS tin-lead (63/37).
Packaging D = 13″ machine ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To
have a leader and trailer added ($25 charge), use
code letter D instead.
2. Current rating is for each line.
3. Inductance is per winding, tested at 1 MHz.
4. Operating temperature range -40°C to +85°C.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
• Available in 10 and 8-line versions
• See our PDLF series for 4, 3 and 2-line EMI filters
• Exceptional common mode noise attenuation from 15 MHz
to 300 MHz; passes signal line data below 300 MHz with
minimal attenuation
• DC current capacity of 500 or 100 mA.
• Excellent electrical isolation (300 Vrms)
Designer’s Kit D303 contains four each of all values plus DLF and
PDLF filters
Core material Ferrite
Terminations RoHS compliant tin-silver-copper over silver-
platinum. Other terminations available at additional cost.
Weight CCDLF 8000: 540 mg; CCDLF 8500: 559 mg;CCDLF
10000: 670 mg
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 1000/13″ reel Plastic tape: 16 mm wide
CCDLF8x00: 10.46 mm thick, 12 mm pocket spacing,
4.5 mm pocket depth
CCDLF10000: 10.28 mm thick, 12 mm pocket spacing,
5.0 mm pocket depth
PCB washing Only pure water or alcohol recommended
Typical Response^*
-10
Differential Mode
0
10
20
Common Mode
30
0.1
1
10
100
Frequency (MHz)
*Measured on HP 8753D network analyzer. Ref: 50 Ohms.
1000
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 511-1 Revised 10/30/08