C1061_13 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – PFC Coils

Document 444-1
PFC Coils For ON Semiconductor NCP1653
Power Factor Controller
These coils were developed specifically for use with the
ON Semiconductor NCP1653 Power Factor Controller
(PFC) for driving continuous conduction mode step-up
pre-converters.
The C1061-A operates in 150 Watt applications. The
C1062­­‑B operates in 300 Watt applications and is speci-
fied by ON Semiconductor in application note AND8185/D.
In addition to the standard parts shown, Coilcraft can
design custom magnetics with inductance, DCR and cur-
rent values to meet your specific requirements. For more
information, contact Coilcraft.
To request free evaluation samples of these coils, contact
Coilcraft or visit www.coilcraft.com.
Part
  _Inductance1
Inductance^ 
Ipk
number Application ±10% (µH)
at Ipk min (µH)
(A)
C1061-AL
150 W
450
C1062-BL
300 W
570
405
4.5
540
6.0
DCR max²
(Ohms)
0.166
0.226
SRF
(MHz)
1.4
1.0
  _Irms3
(A)
3.80
3.55
1. Inductance measured at 100 kHz, 0.1 V, 0 Adc using an Agilent/
HP 4284A impedance analyzer.
2. DCR measured on Cambridge Technology micro-ohmmeter and Coil-
craft CCF858 test fixture.
3. Current that causes a 40°C rise from 25°C ambient.
4. Ambient temperature range: −40°C to +85°C
Storage temperature range: Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
5. Electrical specifications at 25°C.
Typical Inductance vs Frequency
1000
800
600
C1062-BL
C1061-AL
400
300
200
Typical Inductance vs Current
1000
800
600
500
400
C1062-BL
C1061-AL
300
200
100
0.01
0.1
1
Frequency (MHz)
100
10
0.1
1
10
100
Current (A)
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 444-1  Revised 12/06/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.