C1061-AL Datasheet, PDF (1/2 Pages) Coilcraft lnc. – PFC Coils

Document 444-1
PFC Coils For ON Semiconductor NCP1653
Power Factor Controller
These coils were developed specifically for use with the
ON Semiconductor NCP1653 Power Factor Controller
(PFC) for driving continuous conduction mode step-up
pre-converters.
The C1061-A operates in 150 Watt applications. The
C1062-B operates in 300 Watt applications and is speci-
fied by ON Semiconductor in application note AND8185/D.
In addition to the standard parts shown, Coilcraft can
design custom magnetics with inductance, DCR and
current values to meet your specific requirements. For
more information, contact Coilcraft.
To request free evaluation samples of these coils,
contact Coilcraft or visit www.coilcraft.com.
Part
Inductance¹
Inductance
Ipk
DCR max²
SRF
number Application ±10% (µH)
at Ipk min (µH)
(A)
(Ohms)
(MHz)
C1061-AL
150 W
450
C1062-BL
300 W
570
405
4.5
0.166
1.4
540
6.0
0.226
1.0
1. Inductance measured at 100 kHz, 0.1 V, 0 Adc using an Agilent/
HP 4284A impedance analyzer.
2. DCR measured on Cambridge Technology micro-ohmmeter and
Coilcraft CCF858 test fixture.
3. Average current for a 40°C rise above 25°C ambient.
4. Operating temperature range −40°C to +125°C.
5. Electrical specifications at 25°C.
Irms³
(A)
3.80
3.55
Typical Inductance vs Frequency
1000
800
600
C1062-BL
C1061-AL
400
300
200
Typical Inductance vs Current
1000
800
600
500
400
300
C1062-BL
C1061-AL
200
100
0.01
© Coilcraft, Inc. 2009
0.1
1
Frequency (MHz)
100
10
0.1
1
10
100
Current (A)
Specifications subject to change without notice.
Please check our website for latest information.
Document 444-1 Revised 01/05/09