BCL Datasheet, PDF (1/3 Pages) Coilcraft lnc. – Broadband Conical Inductors

Document 334L-1
Broadband Conical Inductors
Part
number
BCL-221JL
BCL-531JL
BCL-122JL
BCL-162JL
BCL-232JL
BCL-272JL
BCL-632JL
BCL-652JL
BCL-802JL
  _Inductance1
±5% (µH)
0.22
0.53
1.20
1.65
2.35
2.75
6.35
6.50
8.00
DCR max
(Ohms)
0.10
0.15
1.05
0.60
1.61
0.40
0.92
0.70
3.39
  _Irms2
(mA)
1200
1060
270
490
270
675
480
650
230
Weight
mg
10.2
19.8
5.1
17.1
8.5
67.2
81.0
151
25.3
1. Inductance measured at 10 MHz, 0.1 Vrms, 0 Adc using an Agilent/
HP 4286A LCR meter and a Coilcraft CCF 1111 fixture.
2. Current that causes a 40°C rise from 25°C ambient.
3. Electrical specifications at 25°C.
Irms Derating
120
110
100
90
80
70
60
50
40
30
20
10
0
-40 -20
0
20 40 60 80 100
Ambient temperature (°C)
120 140
• Designed specifically for broadband and high frequency
applications.
• Operates as a series of narrow-band inductors throughout
an operating frequency range of 10 MHz up to 40 GHz.
• Ideal for use in ultra-wideband bias Tees, where the conical
inductor provides the path for the DC bias injection or extraction
while isolating the power source from the active device.
• Supplied with “flying leads” that allow adjustment of the
mounting angle.
• For a surface mount version with a self positioning mounting
bracket, consider the BCR series.
Terminations  Tin-silver-copper (96.5/3/0.5) over copper
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
125°C with derated current
Storage temperature  Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  25 per tray
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
CL
D
B
2
C
µ
1
E
A (ID)
PC board
µ Optimum mounting angle is application specific.
Dimensions
A
B max C max D
E
BCL-221 0.008 ±0.002 0.057 0.138 0.166 ±0.010 0.100 ±0.010
0,20 ±0,05 1,45 3,51 4,216 ±0,25 2,54 ±0,25
BCL-531 0.008 ±0.002 0.071 0.179 0.166 ±0.010 0.100 ±0.010
0,20 ±0,05 1,80 4,55 4,216 ±0,25 2,54 ±0,25
BCL-122 0.008 ±0.002 0.045 0.115 0.166 ±0.010 0.100 ±0.010
0,20 ±0,05 1,14 2,92 4,216 ±0,25 2,54 ±0,25
BCL-162 0.008 ±0.002 0.067 0.174 0.166 ±0.010 0.100 ±0.010
0,20 ±0,05 1,70 4,42 4,216 ±0,25 2,54 ±0,25
BCL-232 0.008 ±0.002 0.060 0.150 0.166 ±0.010 0.100 ±0.010
0,20 ±0,05 1,52 3,81 4,216 ±0,25 2,54 ±0,25
BCL-272 0.008 ±0.002 0.107 0.310 0.275 ±0.010 0.100 ±0.010
0,20 ±0,05 2,72 7,87 6,985 ±0,25 2,54 ±0,25
BCL-632 0.008 ±0.002 0.116 0.340 0.275 ±0.010 0.100 ±0.010
0,20 ±0,05 2,95 8,62 6,985 ±0,25 2,54 ±0,25
BCL-652 0.008 ±0.002 0.140 0.435 0.390 ±0.010 0.100 ±0.010
0,20 ±0,05 3,56 11,05 9,906 ±0,25 2,54 ±0,25
BCL-802 0.008 ±0.002 0.074 0.237 0.180 ±0.010 0.100 ±0.010
0,20 ±0,05 1,88 6,02 4,572 ±0,25 2,54 ±0,25
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
Document 334L-1  Revised 06/27/13