B0727_13 Datasheet, PDF (1/1 Pages) Coilcraft lnc. – ADSL2 Transformer

Document 414
ADSL2 Transformer ForBroadcomBCM6348
Router Chip
• Designed for use with the Broadcom BCM6348 router chip
• Low leakage inductance and 1875 V interwinding isolation
• Evaluated and approved by UL to meet 60950 under a
Supplementary Insulation System with a working voltage of
250 Vrms, 353.5 V peak.
Core material Ferrite
Terminations  RoHS tin-silver over tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight  6.2 g
Ambient temperature  –40°C to +85°C
Storage temperature  Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF)  26,315,789 hours
Packaging  175 per 13″ reel  Plastic tape:  32 mm wide,
0.42 mm thick, 28 mm pocket spacing, 12.9 mm pocket depth
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf

Line side
Leakage
Part Turns ratio ^  inductance^{2  } inductance^{3  } Capacitance^{4 DCR max (Ohms)}
  _number1 _{line : chip ±5% (µH)}
max (µH)
max (pF) chip side   line side
B0727-BL_
2 : 1
409.5
6.5
65.0

0.645 (1-4) 0.284 (10-7)
0.645 (2-5) 0.371 ((9-6)
Longitudinal
balance
THD
min (dB) max (dB)
50.0 (1.1 MHz) –80
1. When ordering, please specify termination and packaging coded:
B0727-BLD
Termination: L = RoHS tin-silver over tin over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape
(175 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and
trailer added ($25 charge), use code letter D instead.
2. Inductance measured at 10 kHz, 0.1 Vrms, 0 Adc with windings connected in series.
3. Leakage inductance measured at 100 kHz, 0.1 Vrms, 0 Adc from pins 1 to 5 with
pins 4 and 2 connected and all chip side pins shorted.
4. Capacitance measured at 100 kHz, 0.1 Vrms, 0 Adc from chip side to line side.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.500 _max
12,70
0.039
1,00
1
Line ⁴
side ₂
5
10
7 _Chip
9 ^side
6
0.061
1,55
0.590
14,99
0.050
1,27
Recommended
Land Pattern
1
Dimensions are in
inches
mm
0.098
2,50
1
0.530
13,46
max
5
Dot above pin1
01.76,9795max
0.512
13,00
0.004 /0,10
0.028
10 ^0,70
0.098
2,50
6
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 414  Revised 10/20/08
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.