AE612PNB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Outgassing Compliant Power Inductors

1278 POWER INDUCTORS
Outgassing Compliant Power Inductors AE612PNB
■ High current, low DCR shielded power inductors
■ Passes NASA low outgassing specifications
■ High temperature materials allow operation in ambient
temperatures up to 165°C.
■ Tin-lead (Sn-Pb) terminations for the best possible board
adhesion
Core material Ferrite
Terminations  Tin-lead (63/37) over tin over nickel over phos bronze.
Weight:  3.8 g – 4.6 g
Ambient temperature  –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature  Component: –55C to +155°C.
Packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging  500/13″ reel; 
Plastic tape:  24 mm wide, 0.4 mm thick, 16 mm pocket spacing,
8.1 mm pocket depth
     
^  Inductance²
  DCR³
(mOhms)
  _{Part number}1
(µH)
typ  max
AE612PNB102NSZ    1.0 ±30% 6.3 7.0
AE612PNB142NSZ    1.4 ±30% 8.8 9.8
AE612PNB222NSZ    2.2 ±30% 9.4 10.5
AE612PNB272NSZ    2.7 ±30% 10.1 11.3
AE612PNB392NSZ    3.9 ±30% 11.7 13.0
AE612PNB472MSZ    4.7 ±20% 13.9 15.5
AE612PNB562MSZ    5.6 ±20% 15.7 17.5
AE612PNB682MSZ    6.8 ±20% 19.1 21.3
AE612PNB822MSZ    8.2 ±20% 20.3 22.6
AE612PNB103MSZ   10 ±20% 21.8 24.3
AE612PNB123MSZ   12 ±20%
AE612PNB153MSZ   15 ±20%
AE612PNB183MSZ   18 ±20%
AE612PNB223MSZ   22 ±20%
AE612PNB273MSZ   27 ±20%
23.2 25.8
27.9 31.0
30.8 34.3
35.5 39.5
45.0 50.0
AE612PNB333MSZ   33 ±20%
AE612PNB393MSZ   39 ±20%
AE612PNB473MSZ   47 ±20%
AE612PNB563MSZ   56 ±20%
AE612PNB683MSZ   68 ±20%
61.9 68.8
69.1 76.8
72.3 80.4
80.2 89.2
91.3 101.5
AE612PNB823MSZ   82 ±20%
AE612PNB104MSZ   100 ±20%
AE612PNB124KSZ   120 ±10%
AE612PNB154KSZ   150 ±10%
AE612PNB184KSZ   180 ±10%
125.9 139.9
135.1 150.2
182.3 202.6
216.5 240.6
229.0 254.5
AE612PNB224KSZ   220 ±10%
AE612PNB274KSZ   270 ±10%
AE612PNB334KSZ   330 ±10%
AE612PNB394KSZ   390 ±10%
AE612PNB474KSZ   470 ±10%
323.6 359.6
415.6 461.8
487.3 541.5
533.6 592.9
707.5 786.2
AE612PNB564KSZ   560 ±10% 777.4 863.8
AE612PNB684KSZ   680 ±10% 1045 1162
AE612PNB824KSZ   820 ±10% 1166 1296
AE612PNB105KSZ 1000 ±10% 1334 1482
  SRF⁴
(MHz)
min  typ
80 115
60 85
42 60
28 40
25 35
23 33
21 30
16 23
14 20
12 17
11 15
9.0 13
8.4 12
7.7 11
7.0 10
6.6 9.5
6.0 8.5
5.3 7.5
4.9 7.0
4.6 6.5
3.5 5.0
3.1 4.5
3.0 4.3
2.9 4.1
2.8 4.0
2.4 3.4
2.2 3.1
2.0 2.9
1.9 2.7
1.6 2.2
1.4 2.0
1.2 1.7
1.0 1.4
0.90 1.3
  _{Isat (A)}5 _{  Irms (A)}6
10% 20% 30% 20°C 40°C
drop drop drop rise rise
31.84 35.04 36.84
25.04 27.76 29.52
22.56 24.80 25.96
18.76 20.72 22.04
16.52 18.24 19.20
7.1 10.1
6.8 9.8
6.3 9.2
6.1 8.6
5.7 7.7
15.30 16.90 17.76 4.3 6.2
13.38 14.86 15.74 4.3 6.2
12.10 13.56 14.20 4.2 6.0
11.38 12.60 13.28 4.1 5.9
10.62 11.82 12.48 4.0 5.7
8.90 9.88 10.44 3.7 5.2
8.36 9.32 9.94 3.5 4.9
8.00 8.88 9.36 3.0 4.5
7.08 7.88 8.34 2.9 4.0
6.32 7.08 7.54 2.6 3.6
5.96 6.56 6.98 2.3 3.1
5.38 5.94 6.28 2.1 3.0
4.76 5.40 5.66 2.0 2.9
4.40 4.98 5.30 1.9 2.7
3.92 4.46 4.74 1.8 2.6
3.66 4.08 4.38 1.6 2.3
3.12 3.56 3.78 1.5 2.2
3.02 3.36 3.58 1.4 1.9
2.60 2.94 3.10 1.3 1.8
2.36 2.68 2.84 1.2 1.7
2.24 2.50 2.62 1.0 1.6
1.94 2.18 2.34 0.90 1.2
1.72 1.92 2.06 0.80 1.0
1.62 1.82 1.92 0.75 1.0
1.44 1.64 1.74 0.66 0.90
1.40 1.54 1.66 0.60 0.80
1.24 1.32 1.46 0.55 0.75
1.14 1.28 1.42 0.50 0.70
0.982 1.08 1.18 0.48 0.68
1. When ordering, please specify testing code:
AE612PNB105KSZ
Testing: Z = COTS
H = Screening per Coilcraft
CP‑SA‑10001
N = Screening per Coilcraft
CP‑SA‑10004
2. Inductance tested at 100 kHz, 0.1 Vrms,
0 Adc using an Agilent/HP 4263B LCR
meter or equivalent.
3. DCR measured on a micro-ohmmeter and a
Coilcraft CCF858 test fixture.
4. SRF measured using an Agilent/HP 8753D
network analyzer.
5. Typical DC current at which the inductance
drops the specified amount from its value
without current.
6. Typical current that causes the specified
temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
®
Specifications subject to change without notice.
Please check our website for latest information. Document AE598-1  Revised 07/26/11
© Coilcraft, Inc. 2011
1102 Silver Lake Road
Cary IL 60013
Phone [phone]
Fax [phone]
E-mail [e-mail]
Web www.coilcraft-cps.com