|
AE536RAT Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Outgassing Compliant Air Core Inductors | |||
|
AIR CORE INDUCTORS
OutgassingCompliantAirCoreInductors AE536RAT
â High Q over a wide range of frequencies
â High temperature materials allow operation in ambient
temperatures up to 155°C.
â Passes NASA low outgassing specifications
â Tin-lead (63/37) terminations ensure the best possible
board adhesion
Terminationsâ Tin-lead (63/37) over copper
Ambient temperatureâ â55°C to +125°C with Imax current, +125°C
to +155°C with derated current
Storage temperatureâ Component: â55°C to +155°C.
Tape and reel packaging: â55°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)â +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packagingâ 800 per 13â³ reel
Plastic tape: 24 mm wide, 0.3 mm thick, 12 mm pocket spacing,
6.1 mm pocket depth
Part number1
AE536RAT90N_SZ
AE536RATR11_SZ
AE536RATR13_SZ
AE536RATR17_SZ
AE536RATR21_SZ
AE536RATR22_SZ
AE536RATR25_SZ
AE536RATR31_SZ
AE536RATR38_SZ
AE536RATR42_SZ
AE536RATR49_SZ
AE536RATR54_SZ
â Inductance2
Percent
â Q3
Turns
(nH)
tolerance
min
9
90
5,2
95
10
111
5,2
87
11
130
5,2
87
12
169
5,2
95
13
206
5,2
95
14
222
15
246
16
307
17
380
18
422
5,2
92
5,2
95
5,2
95
5,2
95
5,2
95
19
491
20
538
5,2
95
5,2
87
â SRF min4
(GHz)
1.140
1.020
0.900
0.875
0.800
0.730
0.685
0.660
0.590
0.540
0.535
0.490
â DCR max5
(mOhm)
15
15
20
25
30
35
35
35
50
60
65
90
1. When ordering, specify tolerance and testing codes:
AE536RATR54GSZ
Tolerance:
Testing:
G = 2%â J = 5%
Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10003
2. Inductance measured at 50 MHz on an Agilent/HP 4286A or equivalent with a Coilcraft SMD-A test fixture and correlation.
3. Q measured at 50 MHz on an Agilent/HP 4291A or equivalent with a 16193A test fixture or equivalent.
4. SRF measured on an Agilent/HP 8753ES or equivalent with a Coilcraft CCF1268 test fixture.
5. DCR measured on a Keithley 580 Micro-Ohmmeter or equivalent.
6. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Imax
(A)
3.5
3.5
3.0
3.0
3.0
3.0
3.0
3.0
2.5
2.5
2.0
2.0
© Coilcraft, Inc. 2011
®
Specifications subject to change without notice.
Please check our website for latest information. Document AE185-1â Revised 10/24/11
1102 Silver Lake Road
Cary IL 60013
Phone 800-981-0363
Fax 847-639-1508
E-mail cps@coilcraft.com
Web www.coilcraft-cps.com
|
▷ |