|
AE483PYA Datasheet, PDF (1/3 Pages) Coilcraft lnc. – Outgassing Compliant Power Inductors | |||
|
6020 POWER INDUCTORS
Outgassing Compliant Power InductorsâAE483PYA
â Exceptionally low DCR; soft saturation
â Passes vibration testing to 80 G and shock testing to 1000 G
â Passes NASA low outgassing specifications
â High temperature materials allow operation in ambient
temperatures up to 155°C.
â Tin-lead (Sn-Pb) terminations for the best possible board
adhesion
Terminationsâ Tin-lead (63/37) over copper.
Core materialâComposite
Weightâ 0.6 â 0.7 g
Ambient temperatureâ â55°C to +105°C with Irms current, +105°C to
+155°C with derated current
Storage temperatureâ Component: â55°C to +155°C.
Tape and reel packaging: â55°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packagingâ 500 per 7â³reel
Plastic tape:â 12 mm wide, 0.3 mm thick, 8 mm pocket spacing,
2.16 mm pocket depth
â Part number1
AE483PYA111MSZ
AE483PYA151MSZ
AE483PYA301MSZ
AE483PYA401MSZ
AE483PYA561MSZ
AE483PYA681MSZ
AE483PYA821MSZ
AE483PYA102MSZ
AE483PYA122MSZ
â Inductance2
±20% (µH)
0.11
0.15
0.30
0.40
0.56
0.68
0.82
1.0
1.2
âDCR (mOhms)3
typâââmax
1.60
1.85
2.35
2.70
3.45
3.85
4.60
5.05
6.45
7.10
6.80
9.75
11.60
13.50
7.50
10.75
12.80
14.90
âSRF (MHz)4
minâââtyp
148
185
132
165
82
103
67
84
54
68
47
59
42
53
40
50
35
44
1. When ordering, please specify testing code:
AE483PYA122MSZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 4395A or equivalent.
5. Typical dc current at which the inductance drops 30% from its value without current.
6. Typical current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Isat (A)5
45
43
35
26
21
21
19
17
16
Irms (A)6
20°C riseââ 40°C rise
15.8
20.3
15.0
19.5
14.3
18.8
12.8
16.5
11.3
13.9
9.8
12.8
8.6
11.4
7.5
9.0
6.4
7.5
Irms Testing
Irms testing was performed on a
0.060â³ thick pcb with 4 oz. copper
traces optimized to minimize
additional temperature rise.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other
components. Therefore temper-
ature rise should be verified in
application conditions.
© Coilcraft, Inc. 2012
Document AE801-1â Revised 09/14/12
®
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email cps@coilcraft.com
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
|
▷ |