AE475RAT Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Outgassing Compliant Air Core Inductors

AIR CORE INDUCTORS
OutgassingCompliantAirCoreInductors AE475RAT
■ High Q over a wide range of frequencies
■ High temperature materials allow operation in ambient
temperatures up to 155°C.
■ Passes NASA low outgassing specifications
■ Tin-lead (Sn-Pb) terminations ensure the best possible
board adhesion
Terminations  Tin-lead (63/37) over copper
Ambient temperature  –55°C to +125°C with Imax current, +125°C
to +155°C with derated current
Storage temperature  Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging   500 per 7″reel
Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 4.2
mm pocket depth

 _{Part number}1
AE475RAT22N_SZ
AE475RAT27N_SZ
AE475RAT33N_SZ
AE475RAT39N_SZ
AE475RAT47N_SZ
AE475RAT56N_SZ
AE475RAT68N_SZ
AE475RAT82N_SZ
AE475RATR10_SZ
AE475RATR12_SZ
AE475RATR15_SZ
 _Inductance2
(nH)
22
27
33
39
47
56
68
82
100
120
150
Percent
tolerance
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
 _Q3
 _Q3
typ
min
135
100
135
100
130
100
135
100
135
100
125
100
120
100
120
100
115
100
125
100
145
100
 _{SRF min}4
(GHz)
3.2
2.7
2.5
2.1
2.1
1.5
1.5
1.3
1.2
1.1
0.75
 _{DCR max}5
(mOhm)
4.2
4.0
4.8
4.4
5.6
6.2
8.2
9.4
12.3
17.3
33.0
 _Imax
(A)
3.0
3.5
3.0
3.0
3.0
3.0
2.5
2.5
1.7
1.5
1.2
1. When ordering, specify tolerance and testing codes:
AE475RATR15GSZ
Tolerance: G = 2%  J = 5%
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10003
2. Inductance measured at 150 MHz on an Agilent/HP 4286A or equiva-
lent with a Coilcraft SMD-A test fixture and correlation.
3. Q measured at 150 MHz on an Agilent/HP 4291A or equivalent with a
16193A test fixture or equivalent.
4. SRF measured on an Agilent/HP 8753ES or equivalent with a Coilcraft
CCF1268 test fixture.
5. DCR measured on a Keithley 580 Micro-Ohmmeter or equivalent.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2011
®
Specifications subject to change without notice.
Please check our website for latest information. Document AE184-1  Revised 09/08/11
1102 Silver Lake Road
Cary IL 60013
Phone [phone]
Fax [phone]
E-mail [e-mail]
Web www.coilcraft-cps.com