AE439RAT Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Outgassing Compliant Air Core Inductors

AIR CORE INDUCTORS
Outgassing Compliant Air Core Inductors
AE439RAT
AE470RAT
■ High temperature materials allow operation in ambient
temperatures up to 155°C.
■ Passes NASA low outgassing specifications
■ Tin-lead (Sn-Pb) terminations ensures the best possible
board adhesion
Terminations  Tin-lead (63/37) over copper
Ambient temperature  –55°C to +125°C with Imax current, +125°C
to +155°C with derated current
Storage temperature  Component: –55°C to +155°C.
Packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 
AE439RAT: 700/7″ reel  Plastic tape: 12 mm wide, 0.32 mm thick,
8 mm pocket spacing, 3.3 mm pocket depth
AE470RAT: 500/7″ reel  Plastic tape: 16 mm wide, 0.28 mm thick,
8 mm pocket spacing, 3.4 mm pocket depth
PCB washing  Only pure water or alcohol recommended
SRF DCR
^  L² Percent ^  Q^{3  } min^{4  } max⁵ Imax Weight
  _{Part number}1 _{Turns (nH) tol min (GHz) (mOhm) (A) (mg)}
AE439RAT2N5KSZ 1 2.5 10 145 12.5 1.1 4
31
AE439RAT5N0_SZ 2 5.0 5,2 140 6.5 1.8 4
42
AE439RAT8N0_SZ 3 8.0 5,2 140 5.0 2.6 4
52
AE439RAT13N_SZ 4 12.5 5,2 137 3.3 3.4 4
65
AE439RAT19N_SZ 5 18.5 5,2 132 2.5 3.9 4
78
AE470RAT18N_SZ 6 17.5 5,2 100 2.2 4.5 4 100
AE470RAT22N_SZ 7 22.0 5,2 102 2.1 5.2 4 110
AE470RAT28N_SZ 8 28.0 5,2 105 1.8 6.0 4 118
AE470RAT36N_SZ 9 35.5 5,2 112 1.5 6.8 4 133
AE470RAT43N_SZ 10 43.0 5,2 106 1.2 7.9 4 147
1. When ordering, please specify tolerance and testing codes:
AE470RAT43NGSZ
Tolerance: G = 2%  J = 5%
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10003
2. Inductance measured at 150 MHz on an Agilent/HP 4286A or equivalent with a
Coilcraft SMD-A test fixture and correlation.
3. Q measured at 150 MHz on an Agilent/HP 4291A or equivalent with a 16193A
test fixture or equivalent.
4. SRF measured on an Agilent/HP 8753ES network analyzer or equivalent with a
Coilcraft CCF1268 test fixture. Parts with SRF >5 GHz are verified to >5 GHz in
screening
5. DCR measured on a Keithley 580 Micro-Ohmmeter or equivalent.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Dimensions
are
in
inches
mm
© Coilcraft, Inc. 2011
®
Specifications subject to change without notice.
Please check our website for latest information. Document AE107-1  Revised 09/08/11
1102 Silver Lake Road
Cary IL 60013
Phone [phone]
Fax [phone]
E-mail [e-mail]
Web www.coilcraft-cps.com