A05TGLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Mini Spring Air Core Inductors

Document 107-1
Mini Spring™ Air Core Inductors
• Small air core inductors feature high Q and tight tolerances
• Acrylic jacket provides a flat top for pick and place
• Solder coated leads ensure reliable soldering
Terminations  RoHS compliant tin-silver over copper. Other termina-
tions available at additional cost.
Ambient temperature  –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature  Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging A0xT: 700/7″ reel; 2500/13″ reel  Plastic tape: 12 mm wide,
0.32 mm thick, 8 mm pocket spacing, 3.3 mm pocket depth
BxxT: 500/7″ reel; 2200/13″ reel  Plastic tape: 16 mm wide,
0.28 mm thick, 8 mm pocket spacing, 3.4 mm pocket depth
PCB washing  Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
SRF
Part
  _L2 _Percent   _Q4   _min5
  _number1 _{Turns (nH)}   _tol3 _{min (GHz)}
A01TKL_
A02T_L_
A03T_L_
A04T_L_
A05T_L_
1 2.5 10 145 12.5
2 5.0 5,2,1 140 6.5
3 8.0 5,2,1 140 5.0
4 12.5 5,2,1 137 3.3
5 18.5 5,2,1 132 2.5
B06T_L_ 6 17.5 5,2,1 100 2.2
B07T_L_ 7 22.0 5,2,1 102 2.1
B08T_L_ 8 28.0 5,2,1 105 1.8
B09T_L_ 9 35.5 5,2,1 112 1.5
B10T_L_ 10 43.0 5,2,1 106 1.2
DCR
  _max6  _Irms7
(mOhm) (A)
1.1 4
1.8 4
2.6 4
3.4 4
3.9 4
4.5 4
5.2 4
6.0 4
6.8 4
7.9 4
Weight
(mg)
31
42
52
65
78
100
110
118
133
147
1. When ordering, please specify tolerance, termination and packaging codes:
A02TGLC
Tolerance: F = 1%  G = 2%  J = 5%  K = 10%  (Table shows stock
tolerances in bold.)
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape,
700 (AxxT) or 500 (BxxT) parts per full reel.
B = Less than full reel. In tape, but not machine-ready. To have
a leader and trailer added ($25 charge), use code letter C
instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape.
Factory order only, not stocked, 2500 (AxxT) or 2200 (BxxT)
parts per full reel.
2. Inductance measured at 150 MHz with an Agilent/HP 4286 or equivalent, a
Coilcraft SMD-A and correlation.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 150 MHz using an Agilent/HP 4291A with an Agilent/HP 16193A
test fixture or equivalents.
5. SRF tested on an Agilent/HP 8720D or equivalent and a Coilcraft SMD-D fixture.
6. DCR tested on the Cambridge Technology Model Micro-ohmmeter or equivalent.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Dimensions are in
inches
mm
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 107-1  Revised 10/03/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.