90-01 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Axial Lead Chokes

Document 115-1
Axial Lead Chokes – 90 Series
This series was discontinued on
December 31, 2006. An RoHS-compliant
version will not be made.
Coilcraft’s axial lead chokes are totally encapsulated in a
durable epoxy coating. Their low cost compared to molded
type chokes makes them particularly attractive to high
volume users. Coilcraft chokes are available in the stan-
dard values listed here as well as in custom values to meet
your specific requirements.
Typical Q vs Frequency
125
2.2 µH
22 µH
3.3 µH
100
10 µH
68 µH
75
150 µH
1000 µH
50
0.10 µH
0.22 µH
0.47 µH
1.0 µH
25
0
0.2
1
10
100
Frequency (MHz)
2.52 ±0.080
64 ±2,03
Features
• No molding stress to break wire
• 10% inductance tolerance standard, 5%
available
• Temperature coefficient compatible with
N030-N080 capacitors through part
number 90-30
• Standard EIA color coding
• Significant savings for high volume users
• Available bulk packed in conventional tape
and reel or “ammo packs.” Custom lead
forming also available
• Offered in 49 standard values or in custom
values
0.118
2,997
max
dia
0.300
7,62
max
24 AWG tinned copper
Weight: 171 – 201 mg
Color Coding – Inductance in μH
Significant digit / Decimal point
Significant digit / Decimal point
Significant digit / Multiplier
Tolerance
Black = 0
Brown = 1
Red = 2
Orange = 3
Yellow = 4
Green = 5
Blue = 6
Violet = 7
Gray = 8
White = 9
Gold = Decimal point
Tolerance: Silver = 10%
Gold = 5%
Notes:
A gold stripe in the 1st or 2nd
location represents a decimal point.
When a decimal point is used, there
is no multiplier.
The inductance value indicated is in
microHenries.
Specifications subject to change without notice.
Please check our website for latest information. Document 115-1 Revised 12/31/06
© Coilcraft, Inc. 2009