164-01A06L_13 Datasheet, PDF (1/3 Pages) Coilcraft lnc. – 5 mm Tunable Inductor – 1 64, 165 Series

Document 110-1
5mmTunableInductor–164, 165 Series
TRITUNER 3 TOOLS IN 1
SEE INDEX
TUNING WRENCH
Unshielded Styles
0.139 ±0.005
3,53 ±0,13
• These tunables offer the compactness of a 5 mm coil and the
low drift reliability of an insert molded coil.
• Inductance values from 9 to over 280 nH
• Optional plated brass cans provide integral shielding.
• Can be ordered without cores for use as fixed inductors.
Designer’s Kit M305 contains 2 each of all parts
Core material  Aluminum, 0.187″ (4.75 mm) long.
Terminations  Leads: RoHS compliant tin-silver over copper. Other
terminations available at additional cost. Shield can tabs: Tin-silver
over nickel over brass
Weight
164 series  unshielded: 0.16 – 0.31 g; with shield can: 0.45 – 0.60 g
165 series  unshielded: 0.15 – 0.25 g; with shield can: 0.43 – 0.54 g
Ambient temperature  –40°C to +85°C
Storage temperature  Component: –40°C to +85°C.
Packaging tubes: –40°C to +80°C
Resistance to soldering heat:  Wave solder only. Recommended
maximum board surface temperature of 168°C (334°F) for no more
than three seconds. Pre-heating is recommended to minimize time
over the solder nozzle.
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
Two per billion hours / 1/2 billion hours, calculated per Telcordia SR-332
Packaging  50 parts per tube
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
0.130 ±0.040
3,30 ±1,02
0.310 ±0.020
7,87 ±0,51
0.139 ±0.005
3,53 ±0,13
Shielded Styles
0.018
0,46
dia
Start
0.205
5,21
±±00.,01035square
Recommended
Board Layout
0.051 (for shield
1,30 ^{can tabs)}
0.0695
1,765
0.212
5,38
Tab
centers
Finish
0.120 ±0.010
3,05 ±0,25
Tab length
0.0695
CL
1,765
0.038
0,965
0.106
2,69
CL
Part
marking
this side
Start
0.031 ±0.010
0,79 ±0,25
08.3,6440max
165-XX
XXXX
Series Internal Dash
number code number
0.120
3,05
dia
hole
0.230
5,84
square
max
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 110-1  Revised 08/31/09
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.