164-01A06L Datasheet, PDF (1/3 Pages) Coilcraft lnc. – 5 mm Tunable Inductor

Document 110-1
5mmTunableInductor – 164, 165Series
TRITUNER 3 TOOLS IN 1
SEE INDEX
TUNING WRENCH
Unshielded Styles
0.139 ±0.005
3,53 ±0,13
• These tunables offer the compactness of a 5 mm coil
and the low drift reliability of an insert molded coil.
• Inductance values from 9 to over 280 nH
• Optional plated brass cans provide integral shielding
• Can be ordered without cores for use as fixed inductors
Designer’s Kit M305 contains 2 each of all parts
Core material Aluminum, 0.187″ (4.75 mm) long.
Terminations Leads: RoHS compliant tin-silver over copper. Other
terminations available at additional cost. Shield can tabs: Tin-silver
over nickel over brass
Weight
164 series unshielded: 0.16 – 0.31 g; with shield can: 0.45 – 0.60 g
165 series unshielded: 0.15 – 0.25 g; with shield can: 0.43 – 0.54 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Packaging: –40°C to +80°C
Resistance to soldering heat: Wave solder only. Recommended
maximum board surface temperature of 168°C (334°F) for no more
than three seconds. Pre-heating is recommended to minimize time
over the solder nozzle.
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
Two per billion hours / 1/2 billion hours, calculated per Telcordia SR-332
Packaging 50 parts per tube
PCB washing Only pure water or alcohol recommended
0.130 ±0.040
3,30 ±1,02
0.310 ±0.020
7,87 ±0,51
0.139 ±0.005
3,53 ±0,13
Shielded Styles
0.018
0,46
dia
Start
0.205
5,21
±±00.,01035square
Recommended
Board Layout
0.051 (for shield
1,30 ^{can tabs)}
0.0695
1,765
0.212
5,38
Tab
centers
Finish
0.120 ±0.010
3,05 ±0,25
Tab length
0.0695
CL
1,765
0.038
0,965
0.106
2,69
CL
Part
marking
this side
Start
0.031 ±0.010
0,79 ±0,25
08.3,6440max
165-XX
XXXX
Series Internal Dash
number code number
0.120
3,05
dia
hole
05.2,8340square _max
Specifications subject to change without notice.
Please check our website for latest information.
Document 110-1 Revised 08/31/09
© Coilcraft, Inc. 2009