150-01J08L_13 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – 7 mm Tunable RF Coils – 146, 150

Document 109-1
7 mm Tunable RF Coils – 146, 150
Coilcraft tunable coils provide the compactness of a 7 mm
coil and the low drift reliability of an insert molded coil.
Standard inductance values range from less than 50 nH
to over 500 nH. 150 Series coils with a tap are also avail-
able to meet specific requirements.
The windings of these economical coils are precision
molded into a single piece of polypropylene for mechani-
cal and electrical stability. Optional plated brass shield
cans with solderable tabs provide integral shielding and
additional mounting stability.
These parts can be ordered without cores for use as
fixed inductors.
Coilcraft Designer’s Kit M302 contains samples of all
standard 7 mm and 10 mm tunable inductors. To order,
contact Coilcraft or visit http://order.coilcraft.com.
Unshielded Styles
0.268 ±0.005
6,81 mm ±0,13
square
0.450 ±0.020
11,43 ±0,51
0.138 ±0.040
3,5 ±1,02
0.177 ±0.005
4,5 ±0,13
Start
0.177 ±0.005
4,5 ±0,13
0.020
0,51
±0.002
±0.05
dia
Finish
With Shield Can
0.73,060max
0.475
12,1
max
0.039 ±0.010
1,0 ±0,25
0.280
7,1
Tab
centers
Recommended
Board Layout
0.060 (for shield
1,52 ^{can tabs)}
0.0885
2,25
0.216
5,5
dia
hole
0.138 ±0.010
3,51 ±0,25
Tab length
Terminations: Series 146 leads: Tin-silver over copper
Series 150 leads: Matte tin over copper
Shield can tabs: Tin-silver over nickel over brass
Resistance to soldering heat:  Wave solder only. Recommended maximum
board surface temperature of 168°C (334°F) for no more than three seconds.
Pre-heating is recommended to minimize time over the solder nozzle.
Start
0.0885
CL
2,25
Finish
Unshielded
Weight:
146 series 0.44 – 0.70 g
150 series 0.45 – 0.61 g
Packaging:
80 per tube
0.040
1,016
(2)
0.140
3,55
CL
Dimensions are in
inches
mm
With shield can
0.91 – 1.12 g
0.88 – 1.08 g
75 per tube
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 109-1  Revised 09/30/08
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.