132-09SM-L Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Maxi Spring™ Air Core Inductors

Document 185-1
Maxi Spring^™ Air Core Inductors
• Air core inductors feature higher Q, L and current ratings
• Rigid package provides a flat surface for pick and place
• Leads are locked in position for precise terminal spacing
Weight 0.42 – 0.59 g
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 800/13″ reel Plastic tape: 24 mm wide, 0.3 mm thick,
12 mm pocket spacing, 6.1 mm pocket depth
PCB washing Only pure water or alcohol recommended
Part number¹
Inductance² Percent
Q²
Turns
(nH)
tolerance³ typ
Q²
Test freq. SRF min⁴ DCR max⁵ Irms⁶
min
(MHz)
(GHz)
(mOhm)
(A)
132-09SM_L_
9
90
5,2
114
95
50
1.140
15
3.5
132-10SM_L_
10
111
5,2
104
87
50
1.020
15
3.5
132-11SM_L_
11
130
5,2
104
87
50
0.900
20
3.0
132-12SM_L_
12
169
5,2
114
95
50
0.875
25
3.0
132-13SM_L_
13
206
5,2
114
95
50
0.800
30
3.0
132-14SM_L_
14
222
132-15SM_L_
15
246
132-16SM_L_
16
307
132-17SM_L_
17
380
132-18SM_L_
18
422
5,2
110
92
5,2
114
95
5,2
114
95
5,2
114
95
5,2
114
95
50
0.730
35
3.0
50
0.685
35
3.0
50
0.660
35
3.0
50
0.590
50
2.5
50
0.540
60
2.5
132-19SM_L_
19
491
132-20SM_L_
20
538
5,2
114
95
5,2
104
87
50
0.535
65
2.0
50
0.490
90
2.0
1. When ordering, specify tolerance, termination and packaging codes:
132-20SMGLD
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Tolerance: G = 2% J = 5%
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape
(800 parts per full reel).
B = Less than full reel. In tape, but not machine-ready. To
have a leader and trailer added ($25 charge), use code
letter D instead.
2. Inductance and Q tested on the Agilent/HP 4291A with the 16193 fixture
and correlation.
3. Tolerances in bold are stocked for immediate shipment.
4. SRF tested on the Agilent/HP 8753D and the SMD-D test fixture.
5. DCR tested on the Cambridge Technology Model 510 Micro Ohmmeter.
6. Current that causes a 15°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 185-1 Revised 10/29/08