1008LS-152XJLB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors -1008LS (2520)

Document 103-1
Chip Inductors – 1008LS (2520)
• Lower DCR than other 1008 inductors
• Ferrite construction for high current handling
• Inductance values: 1.0 – 100 µH
Request free evaluation samples by contacting Coilcraft
or visiting www.coilcraft.com.

  _{Part number}1
  _Inductance2
(µH)
1008LS-102XJL_    1.0 @ 7.9 MHz
1008LS-122XJL_    1.2 @ 7.9 MHz
1008LS-152XJL_    1.5 @ 7.9 MHz
1008LS-182XJL_    1.8 @ 7.9 MHz
1008LS-222XJL_    2.2 @ 7.9 MHz
1008LS-272XJL_    2.7 @ 7.9 MHz
1008LS-332XJL_    3.3 @ 7.9 MHz
1008LS-392XJL_    3.9 @ 7.9 MHz
1008LS-432XJL_    4.3 @ 7.9 MHz
1008LS-472XJL_    4.7 @ 7.9 MHz
1008LS-502XJL_    5.0 @ 7.9 MHz
1008LS-562XJL_    5.6 @ 7.9 MHz
1008LS-622XJL_    6.2 @ 7.9 MHz
1008LS-682XJL_    6.8 @ 7.9 MHz
1008LS-822XJL_    8.2 @ 7.9 MHz
1008LS-912XJL_    9.1 @ 7.9 MHz
1008LS-103XJL_   10 @ 7.9 MHz
1008LS-123XJL_   12 @ 2.5 MHz
1008LS-153XJL_   15 @ 2.5 MHz
1008LS-183XJL_   18 @ 2.5 MHz
1008LS-223XJL_   22 @ 2.5 MHz
1008LS-273XJL_   27 @ 2.5 MHz
1008LS-333XJL_   33 @ 2.5 MHz
1008LS-393XJL_   39 @ 2.5 MHz
1008LS-473XJL_   47 @ 2.5 MHz
1008LS-563XJL_   56 @ 2.5 MHz
1008LS-683XJL_   68 @ 0.79 MHz
1008LS-104XJL_ 100 @ 0.79 MHz
Percent ^  SRF min⁴
  _tolerance
  _{Q min}3
(MHz)
5
48 @ 50 MHz
230
5
37 @ 50 MHz
210
5
37 @ 50 MHz
190
5
37 @ 50 MHz
170
5
37 @ 50 MHz
150
5
37 @ 50 MHz
135
5
37 @ 50 MHz
120
5
37 @ 7.9 MHz
105
5
30 @ 7.9 MHz
85
5
32 @ 7.9 MHz
90
5
25 @ 7.9 MHz
30
5
37 @ 7.9 MHz
80
5
32 @ 7.9 MHz
75
5
37 @ 7.9 MHz
70
5
37 @ 7.9 MHz
65
5
37 @ 7.9 MHz
57
5
37 @ 7.9 MHz
60
5
28 @ 2.5 MHz
38
5
34 @ 2.5 MHz
30
5
28 @ 2.5 MHz
26
5
20 @ 2.5 MHz
22
5
24 @ 2.5 MHz
12
5
22 @ 2.5 MHz
19
5
33 @ 2.5 MHz
26
5
20 @ 2.5 MHz
12
5
20 @ 2.5 MHz
8.0
5
14 @ 0.79 MHz
5.7
5
13 @ 0.79 MHz
4.5
  _{DCR max}5
(Ohms)
0.62
0.68
0.76
0.84
1.10
1.28
1.46
1.56
1.70
1.68
2.20
1.82
2.50
2.00
2.65
2.90
2.95
3.30
3.70
4.00
6.14
6.45
7.00
10.0
10.7
10.0
13.5
20.5
  _Irms6
(mA)
700
650
630
600
520
490
450
420
400
400
360
380
330
360
330
310
300
290
280
160
270
210
200
170
160
170
145
120
Color
  _code7
Black
Red
Green
Gray
Red
Violet
Orange
White
Orange
Violet
Black
Blue
Red
Gray
Red
Brown
Black
Red
Green
Gray
Red
Violet
Orange
White
Violet
Blue
Gray
Black
1. When ordering, please specify termination and packaging codes:
1008LS-103XJLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
E = Halogen free component. RoHS compliant silver-
palladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C=7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D=13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
4. SRF measured using an Agilent/HP 8753D network analyzer with a
Coilcraft SMD-D fixture.
5. DCR measured on a Cambridge Technology Micro-ohmmeter.
6. Current that causes a 15°C temperature rise from 25°C. Because of
their open construction, these parts will not saturate.
7. Current production parts are marked with one dot. Prior production parts
were marked with three dots. Part marking does not indicate polarity.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Designer’s Kit C336 contains 10 of each stocked value
Core material Ceramic/Ferrite
Environmental  RoHS compliant, halogen free optional
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight  38.3 – 41.0 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+100°C with derated current
Storage temperature  Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +100 to +350 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging  2000/7″ reel  Plastic tape: 8 mm wide, 0.3 mm thick,
4 mm pocket spacing, 2.0 mm pocket depth
PCB washing  Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 103-1  Revised 01/21/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.